Forum Replies Created
-
AuthorPosts
-
electrofix
Moderatorhave you put it into service mode and looked for hidden codes ?
Dave
electrofix
ModeratorDecember 5, 2023 at 11:01 pm in reply to: Bosch Dishwasher “Check Water Error” & Washing Cold (Not Hot) #488728electrofix
Moderatoryes should be 12014980
click the link above it takes you to the bosch spares page for that model
Dave
electrofix
Moderatorhave you checked the socket ?
Dave
December 5, 2023 at 10:01 pm in reply to: Bosch Dishwasher “Check Water Error” & Washing Cold (Not Hot) #488726electrofix
Moderatormatrixresonator wrote:https://www.bosch-home.co.uk/supportdetail/product/SMS40T32UK/51
well done would not come up for me
and it seems this one model uses a different pump and it looks like the one you ordered is correct
Dave
electrofix
Moderatorcold fan right hand side front
did you check condensor both ways
front to back and left to right both must be clear
Dave
electrofix
ModeratorPeter1066 wrote: I take it the heater pump is the one that operates this function?
correctDave
December 5, 2023 at 9:56 am in reply to: Bosch Dishwasher “Check Water Error” & Washing Cold (Not Hot) #488723electrofix
Moderatorwell thats an odd one. not listed on the bosch spares site
you would need to ring Bosch to confirm the correct part no
the highest model listed is /34 and yours is /51 and /34 uses 651956
Dave
December 5, 2023 at 12:26 am in reply to: Bosch Dishwasher “Check Water Error” & Washing Cold (Not Hot) #488720electrofix
Moderatorthe pic is too small for me to see the model
if you go down the ebay listing the part no is given as 12014980 not 651956
if you post a bigger pic or print complete Enr I will check
Dave
electrofix
Moderatorhad a beko do exactly that fault
must have sensed it was hot at the end and filled the machine up after the spin
as i said it was a long shot, never seen a Hotpoint do only a Beko
tried to look up tech but cant trace exact model, have you got the serial no ?
Dave
electrofix
Moderatorhad this before and it was rubbish that got sucked into the motor
dry sump out completely. remove the plastic piece in the sump that partially covers pump entrance
then with a small mirror and a torch you can see the impellor and check for debris
often you can pick it off with bits of bent wire, saves taking the motor out
Daveelectrofix
Moderatortash wrote:thanks Dave. that’s crazy it’s not even attached to the door
it is when you first get it. if you look at the pics carefully you can see it
but yes mad
Dave
electrofix
Moderatorthis is a long shot
not connected to hot water is it ?
Dave
electrofix
Moderatorcomes complete with the door glass
Dave
electrofix
ModeratorPeter1066 wrote:Hi sorry the model no is sms65e32gb
after the GB there is / followed by 2 more numbers
Dave
-
AuthorPosts
