Forum Replies Created
-
AuthorPosts
-
electrofix
Moderatorthat why i said ring them but not you the customer. they want her/him to buy another one and they wont do that if the old one has to be scrapped early
or you could acting as the customer
Dave
January 27, 2023 at 7:37 pm in reply to: Bosch Washing machine not running program after tripping RCD #485569electrofix
Moderatorall board are at the top behind knobs
am expecting a track to have blown for some reason as something shorted out
Dave
January 27, 2023 at 7:20 pm in reply to: Bosch Washing machine not running program after tripping RCD #485567electrofix
Moderatorthink i would be removing the pcb and looking for damage
Dave
electrofix
Moderatorconnect for me has always been overpriced
still use Qualtex and their prices are good but if your turnover falls below about £60 a week they tend to say goodbye
Aswo is good. great on Bosch and vestel. can be a bit dearer on some things but general service level is goodthen there is always Maddocks. have not used them often but a lot of people do
there are a few smaller ones but their names escape me for the moment
Dave
electrofix
Moderatoram like you m8, one man band only order what i need and stock only what fails the most
site shop will be the same, you only stock whats needed
Dave
electrofix
Moderatorwell tds show a production date from 28/4 /2015
Best thing is to get the customer to contact lux customer services and moan at them that this part is not available and it can only be a max of 8 years old. if you can find a reciept to get the purchase date all the better
3558062018
3558062026these should be the part no;s required and they do say ring 03445 610507 on the website and they will try to source
Dave
electrofix
Moderatorreason you cant find is they look like they are obsolete
Dave
Showing parts and accessories for 94971629405 | Model EOB3400EAX | Electrolux UK
electrofix
Moderatorcan you check that pnc number as it does not come up
Dave
electrofix
Moderator[USER=”125″]don[/USER]
you any idea on this one ?Dave
electrofix
Moderatorpump only runs for 2 main reasons
the board or
overflow floatDave
electrofix
Moderatorwell the first thing to do is open the element housing and see if its wet in there as if water is there then that answers the tripping
Dave
electrofix
Moderatoryou need to check the4 motor for continuity on all circuits
you have already pulled off the rear cover on the motor
you then have to work your way along the contacts in order. hold on lead on a contact and then try every other one to see what connects to what
you should have
2 connecting to armature and brushes
2 or 3 connecting to the field coil
2 at a slightly higher resistance for the tachosee if you can find those
if you need to find which one the brushes are you can get to the brush holder with 1 lead of the motor round the side. then look for 2 contacts that connect
do all this with motor plug out
Dave
January 25, 2023 at 9:54 am in reply to: Trying to remove a lock mechanism from a Beko WTK104151W washing machine #485508electrofix
Moderatorthe lock will always click once or twice as the programme starts ot stops
Dave
electrofix
Moderatorcheck the heater relay
Dave
electrofix
Moderatorcant find anymore info apart from utube videos cleaning filters
another site i found said it may be an air path leakage which could include door seal
Dave
-
AuthorPosts
