Forum Replies Created
-
Posts
-
not sure if that sort of info is avaiable but if you post the long number which is the model code and serial someone should be able to check
Dave
pics are limited due to server space
if you want to add pic host them somewhere else and post a public linkDave
yes the knob just pulls off but you will have to strip the cooker to get at the switch.
often you have to take the top offDave
its got all the makings of a board fault
the problem is which board or bothdid you try disconnecting and re connecting the ribbon cable between the 2 boards to rule out bad connection ?
Dave
behind the knob you will find
https://shop.ukwhitegoods.co.uk/081702700-oven-function-switch
find it and check for burnt contacts
Dave
did you trace the lamp back to the board and see if the power supply to the lamp is going on and off
if it’s not then it’s just the lamp
Dave
tech info on these is almost non existant and changing a board, and your wrong, is a real pain not to mention costly
check the machine pumps as on some machines an open circuit pump stop filling
also check heater for earth faults, bit of a long shot but stranger things happen
Dave
bluesky85 wrote:
Can it be repaired, and if yes how much approximately would it cost meis there a model number underneath the unit ?
Dave
you may have snapped the door handle, done lots of them
does the handle feel loose when you pull it. like its doing nothing
https://shop.ukwhitegoods.co.uk/dt11…ne-door-handle
if its not the handle then normally if you turn it off at the wall for at least 5 mins it should open but check water level befroe you do
Dave
done quite a bit for them but the way to play it is this as they can take weeks even months to pay
quote them £60 to go and look if thats enough for your area
go and look if its a silly job like a blocked pump do it and invoice them for call out and lab and hope they dont take long to pay up. you have only lost time so you cant lose a lot. if they dont pay up its no more jobs till they do
so on jobs that need parts i charge £60 plus lab at min £25 plus add 40{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} onto any parts regardless of sourceif it needs parts, price it and tell them you want it up front. You will have to send an invoice but they will pay
just did a microwave for them and they paid me so i fixed it 2 days later
Dave
