Forum Replies Created
-
Posts
-
ok did the motor turn at all ?
am looking for things it is doing wrong or not doing as a poss clue
was wondering if it was a water fill error but since this does not happen on spin then thats out
now thinking motor problem
Dave
there is a drip tray mounted on top of the compressor for defrost water
as for the photo of the underside be careful if you tilt it too far you will have to let it settle for hours before y turn it on
Dave
can you post photo of part on here ?
Its called experience
you dont make the same error twice and you learn oddball faults as you go along
Dave
well it does sound like a board fault but the door locks are cheap so its worth swapping that just to see
for the wma58 model this lock will fit
https://shop.ukwhitegoods.co.uk/int51-compatible-washing-machine-door-lock
but you need to check if yours is the same
Dave
have emailed service info
but my guess is a board has been damaged due to excess vibration as you probably guesses too
I would take out inverter board and look for cracks but beware the high voltage caps
Dave
cant see anything about the lamp
from the looks of pics i would guess glass top unscrews
lamp part no 807 45 30-02 / 6
Dave
maybe the pump is getting iffy. they tend to be intermittent when they wear and the door wont open if there is too much water in the machine
Dave
