[electrofix]

can see there are kits available for some units to repalce the sensors if that is what you fault is

Dave

[electrofix]

sounds like a board power supply fault

you need to be certain you check live and Neutral is getting to the board after failure

Dave

[electrofix]

was the old water hose faulty ?

have you checked the water counter as these fail and machine gives same fault code 1760940100

Dave

[electrofix]

[USER=”2″]kwatt[/USER]

this is more in your line

Any knowledge ?

Dave

[electrofix]

sounds like a shorted relay on the control board energising the transformer

find out which relay controls the microwave and test with a multimeter for short circuits

Dave

[electrofix]

there is no info on testing the motor

there is a test mode but i dont think it will give you any more info than you have which is a fault code

its one of those faults where you have to fit the part to find out if its faulty

Dave

[electrofix]

euro wrote:Its another of the ones on sites we spoke about Dave

Andy

Ahh ok

Dave

[electrofix]

with a serial date of 2022 there is a good chance its still under guarentee

Dave

[electrofix]

adv wrote:he said it has got a modern rcd consumer unit :rolleyes: thanks for help again much appreciated ..;)

well it cant work

its supposed to trip at 30Ma to earth and your shoving about 8 amps

Dave

[electrofix]

found table in the service manual

and yes it could be fan, wiring or board and that the hard bit

its take a gues and buy a part time

Dave

[electrofix]

this is how the faults are listed

Dave

[electrofix]

error is listed as freezer fan error

Dave

[electrofix]

well that proves the age of the house wiring as any modern system would blow the RCD

Dave

[electrofix]

if you want a diagram of a particular area i can probably find one

if you need part numbers i would need the long serial number to get it accurate

Dave

[electrofix]

is it getting hot ?

finding parts diagrams should not be a problem as the unit is a rebadged Vestel unit

Dave

[Author]

Posts