Forum Replies Created
-
AuthorPosts
-
gandh1
ParticipantRe: Stoves 900gdo or new Hotpoint dy330gx
thats what i thought.
but long and short of it is d&g are replacing a customers oven and saying they can only supply the h/p… which i couldnt work out unless its been brought back as a new model??
gandh1
ParticipantRe: Uploading avatar
DON MINE STILL DOESNT WORK!!! 👿
please fix 8) x
gandh1
ParticipantRe: Bosch classixx no water from upper spray arm
first thing is to check if spray arm is getting water to it, and if it is, whether its blocked!!!
all too common is that its just been gunked up with sweetcorn/baked bean shells, plastic/foil wrap or rice…
November 29, 2009 at 6:08 am in reply to: Drum bearings advice needed?? Hotpoint wf100 drum and PHOTOS #304462gandh1
ParticipantRe: Drum bearings advice needed?? Hotpoint wf100 drum and PH
o.m.g. 😯
November 29, 2009 at 5:58 am in reply to: Hoover H160e faulty / overheated motor. Replace or new WM? #304689gandh1
ParticipantRe: Hoover H160e faulty / overheated motor. Replace or new W
❗ now you have bought one, please dont forget to do a regular maintenance wash with all bosch’s in order to keep them clean and mould-free! link>>>
gandh1
ParticipantRe: Slimline washing machines help please!
pound for pound go with the zanussi, it means you can put a work top over it and usually the case for requiring a narrow width appliance is because floor space is at a premium therefore worksurface space is also compromised likewise, and more so with a top loader!!
gandh1
ParticipantRe: Fixing somebody else’s mess
Penguin45 wrote: and the customer is going to pay Chris.
emphasis on the IS then… 😉
gandh1
ParticipantRe: Flybe “airside” installs
i like bsh b/i d/w
so can do heathrow… or gatwick.
or east midlands if it coincided with download festival 😀
gandh1
Participantdonmaico wrote:sorry for the delay in replying,As it turned out it was a blocked pump which was easily cleaned , thank you
❗ A dishwasher is for Washing. to prevent future blockages always scrape plates off into the bin to remove all large leftovers, then rinse plates off prior to dishwashing – you wouldnt put a gravy/sauce-laden plate into a fresly run washing up bowl, so dont do it to the poor d/w! ❗
PS make sure you regularly check the filter, apprix every month if used daily!
gandh1
ParticipantRe: Haier spare parts
have managed to get an interlock direct from china for a w/m that was under guarantee supposedly for free (but cust. couldnt get anywhere with haier uk service team?!) but beware, it was sent by dhl without p&p being paid for.- had to fight and waste a lot of time with both dhl and haier uk getting the parts postage paid for post-delivery. i knew if i paid dhl i wouldnt see that £60 it cost to send from china back so i just kept declining the delivery until dhl told me carriage was finally cleared…
tbh it made the £40 jtm qouted sound cheap in terms of the hassle, and phone calls…
gandh1
ParticipantRe: biffy clyro – only revolutions (cd)
haha!
ken likes metallica!
awesome!
gandh1
ParticipantRe: Please Help – Select 610 by diplomat
kwatt wrote:The model numbers on the manuals are useless gandh, they cover a range as well and are not specific to the appliance that the manual came with. Most are like that now and therefore, next to useless for anything onther than working out how to use and, even then, they can be a challenge.
K.
Ken, ive never seen a diplomat manual so much so i dont think mfis team that operated round here ever gave them to the customers! it was just logical thought of course!
November 22, 2009 at 11:12 pm in reply to: Proline top box little fridge freezer thermostat? #304396gandh1
ParticipantRe: Proline top box little fridge freezer thermostat?
prolly teaching grandma to suck eggs now but went to one of these last month where the elderly owner accidentally knocked the garage setting/cabinet warming switch on. youve prolly spotted it by the stat anyway, but might be worth a check if you havent already?
gandh1
ParticipantRe: Bosch Slimline – leak from underneath?
circulation motor seals commonly fail, salt regen dispenser less so. replaced enough circ seals. also the circ pump housing can degrade from rinseaid attacking the plastic. if that has happened it might be worth inspecting the impeller as that may be on its last legs too.
20 cm from anywhere on a slimline is virtually central, so could even be main sump seal but less likely…
power off and pull out about 6 inches – behind hte plastic kick plate (torx either side) there should be a metal panel on the front that can be removed by taking the 2 torx screws out
one of the other lads on here will probably have more specific instructions, and/or correct me, as my brains a bit fuzzy tonight 🙂
if you want exp. diagrams:
always remember to ask these lads from ukwg for prices before ordering anything direct from bosch as they *can* sometimes be cheaper 🙂
gandh1
ParticipantRe: Hotpoint SE661X oven cutting out
should be just above the fan element cover. LHS. 1 screw in clamp iirc*
*ps i do not guarantee my memory but look there first 😀 -
AuthorPosts
