Forum Replies Created
-
Posts
-
Re: How do you change a circuit board on the Hoover perf WA1
its attatched to the timer, and they need to be changed as a complete unit
whats yer fault?
Re: Creda Condenser Dryer TCR2 How do I Remove the Top
why you wanna clean it?
neway
undo the two screws, and, from the front, use the palm of yor hand, and forcefully push the lid backwards, dont be frightend of hitting it.
the side panel comes off, 1 screw top front corner, screws at rear of machine, slide panel backwards and lift offur in!!!!
Re: Hoover HNL3146 error code
the wire on the thermistors probably broken off at the spade end.. its a ‘no heat’ fault
Re: Hotpoint wd440p modules
well, indespoint, the 5013 pcb is the one tech at merloni suggested
he quoted summink about the serial numbers, but as usual, the trade arent privvy to that just yet
as you know, the 91907 fits a large number of machines, and quite often, they fit, certainly all the washers
the problem becomes on some models, not all
oe of the connections on the board, it just doesnt fit
we’ve been advsed by merloni not to solder the connections,im sure that would work
im just waiting for the pcb to come, and ill compare.. thing is, since the 91907 is now defunct, i cant compare it to the original, only the so called replacement that doesnt fit!!!
doin my head in to be honest
it hasnt happened loads of times, it just the odd one
ill keep you posted
Re: Samsung RS21DCNS
try turning the temp up 1st to 5
if that dont work, ull have to defrost it
similarly, if u take out the second bottom drawer in the fridge, you’ll see the water chamber at the back
warm it up with a hairdryer, it usually works
Re: HOTPOINT VTD20G T/D
alread have, its on pg1 of this thread, but, if it help, the vtd drum is 1703662, the condenser is 1703663
Re: Samsung RS21 – different problem
id be more inclined personally to think theres something in the fridge compartment stopping it from closing?
have u tried taking EVEYRTHING out, shelf and trays, food included?
itll give you your answer
hope this helps
Re: ZANUSSI ZCM611 DUALFUEL OVEN GONE BANG WORTH REPAIRING??
sorry mate
despite your findings, and the fact that the cooker is duel fuel, unfortunately we arent legally allowed to help you
you see, technically, because its gas, its to be repaired by a corgi approved engineer
that doesnt stop u, as the consumer dismantling the thing, just your not legally competent
so unfortunately, its qualified engineer time
sorry, we just arent allowed to help
good luck
heloRe: HOTPOINT VTD20G T/D
you’ll only really stop em scraping if you change the drum assy, that has a shaft attatched to it, and has a greatly differing rear profile
ive done loads, and they all scrape sooner or later, save some money and time and fit a new drum!!!
Re: Dreaded Samsung -SRS2029CSS not sensing temperatures
🙁 u not read these forums yet?
defrost sensors/thermal fuses/evaporator covers are more likely culpritspcb’s are usually reliable
it might help if u read the other samsung posts
just ignore the ridiculous pc fan stuck in with sticky tape thread, thats just silly, and resorted to personal insults via personal messages
hope this helpsRe: indesit wdg1295 not drying efficiently – fluff build up?
yup, the condenser will be blocked, its the big plastic chamber on the rear of the drum
cant go into specifics on removal, i aint bein held responsible for you having your fingers sewn back on
if your gonna do it, unplug, good thick safety gloves and a great deal of patience
Re: Ariston Margherita ALD12 3 Flashes
its a heater / thermister / board fault
1st two are easily tested, the board not so
