Forum Replies Created
-
Posts
-
Re: hotpoint/indesit software (wash doctor)?
the new machines now use a ‘smart card’ to programme the modules, you will be able to buy a smart card reader, when you order a module you then use the reader with the smart card for each machine to programme
Re: Pay up front for Hotpoint repairs
yep. but the ruling is that payment MUST be made upfront, by card, before the call will even be booked!
Re: Creda S150LB No live to main oven element.
had one a while back too, was totally lost till i took out the whole switch, its only then that you may see one contact slightly moved out of place
Re: Indesit W123SUK no flashing light fault!!
yep with all the fault codes on this machine, if heater is o/c it will stick in a wash with no fault shown!
Re: hotpoint d/w
is that the one with the old corrogted hose from the meter tank to sump?, can get sludged up, overfill cuts in & machine stops
Re: hotpoint aqxxd169pm
ive been to a few ‘dead’ machines, every one has had a fried slug on the module! they seem to be attracted to the live board, no other failures in 2 years of prodution yet
Re: BT Webclicks
i had a company do the same with my credit card a while back, the card companies say they cannot cancel a re-couring transaction, however if you tell the card company your card is damaged a new one will be issued with a different expiry date, so when BT try to get the money it will be rejected
Re: hotpoint wma44 flood protection
it does seem odd that this only started after the brushes were changed, no earth faults?,
Re: Indesit WIL103 no motor action or error code
usually if the motor is no go & not registering a fault it will be the board faulty,
Re: Hotpoint mains cables
yep, think i posted about this a while back, the filter & lead is prob fine, its the moulded plugs that are failing, cut it off & fit a wired plug, problem solved!
Re: HPT CTD85 Drum support wheel
ah right, good luck then, never understood norton av, seems to grind everything to a snails pace
