Forum Replies Created
-
Posts
-
Re: WMA bearings
The service spare is the 35mm as this can be fitted in any machine some lower spin models were fitted with 30mm spiders and bearings.
Re: HPT mistral baffle / fridge thermistor (FF72)
You dont get an EA fault if it is condensor fan , you get a warm fridsge and freezer with the sides getting excessivley warm due to the heat not getting dissipated in the condensor and anti condesation loop.
Re: HPT mistral baffle / fridge thermistor (FF72)
The magnetic field of the magnets interfere with the module if the door is covered with them they cause havoc, spoke to the Techinical dept and they confirmed pity we had to find out ourselves though the hard way
Re: Hotpoint 9926A
Check the back of the knob there is an arrow which will point to various postions marked a,b,c etc if you have the wrong knob tease of the back of the broken one noting the position do the same with the new knob , superglue the good back onto the relevant position and your done, i only ever carried a 1 white knob and 1 brown used on any washing machine or washer dryer.
Re: HPT mistral baffle / fridge thermistor (FF72)
Is there any fridge magnets on the fridge door had a few with EA faults 1st couple fitted this that and the other, still same fault removed the magnets and whould you believe it the fault cleared. The baffle motor is not prone to failure.
Re: Idiots on public forums
About a year ago had a guy i went to told me what i needed, i already had the part in my pocket i thought i might need ‘ i asked how he knew said got info from the net and decided he didnt have the skills to tackle it after his wife warned him off, called us out so it seems some people do realise when it is beyond them, i can only assume he got info from this site.
Re: Ultima WD865 Woes
Fitting the 1605230 heat box you also need to remove filter, remove wiring suppying vlave to filter etc etc,
Re: Couple of questions for any passing Hotpoint tech.
As long as it is the same rating i reckon it shouldnt be a problem, beats me why there is so many differant capacitors, is use any one that i have that is the same rating as the one that came off.
Re: Hotpoint bearing removal kits
Gave up using bearing kit still have my drifts come out like a dream with a good whack, never gave them back when they changed to the new kit.
Re: Drum support failure… Do I win a prize?
Only soft water here, i remember when the liquids first came out was given all the hard sell by the manufacturers, 3 years down the road smelly machines corroded spiders didnt take long to put 2 and 2 together same is happening now with the colour powders, what is missing from both?
Re: URGENT WARNING
Used to cover Cellardyke up until a couple of years ago, engineer covering it now was telling me he was stopped about 5 times to check back of his van he wouldnt have bothered but 3 times it was the same guy asking the same question, he was getting well peed off!
