johnsdad

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 145 total)
1 2 3 4 5 6 … 8 9 10
  • Author
    Posts
  • April 17, 2010 at 8:47 pm in reply to: Fridge/Freezer stopped working but light still on inside ? #318113
    johnsdad
    Participant

    Re: Fridge/Freezer stopped working but light still on inside

    sounds like compressor has seized, the click is it tripping out on the overload cut-out

    April 6, 2010 at 7:44 am in reply to: Maytag Neptune (LCD Menu) #317182
    johnsdad
    Participant

    Re: Maytag Neptune (LCD Menu)

    From memory, try pressing the 2 lowest keypads together either side of the display for about 3-4 seconds, should get you into service mode

    March 29, 2010 at 3:29 pm in reply to: maytag /admiral washing machine #316673
    johnsdad
    Participant

    Re: maytag /admiral washing machine

    You need the tool which holds off the 200lb brake spring, then its fairly easy. Sometimes you find one of the tub springs have broken

    March 28, 2010 at 7:19 pm in reply to: Which Report Recommends Beko! #316474
    johnsdad
    Participant

    Re: Which Report Recommends Beko!

    Far better than Chinese trash – and fixable!

    March 26, 2010 at 7:26 pm in reply to: samsung s2026cvw #316425
    johnsdad
    Participant

    Re: samsung s2026cvw

    Check defrost heaters / thermal fuses, most common source of problems as described

    March 13, 2010 at 10:15 pm in reply to: EMF #314891
    johnsdad
    Participant

    Re: EMF

    some people open the door with a long wooden spoon (well back in the day anyway)

    March 13, 2010 at 9:51 pm in reply to: EMF #314888
    johnsdad
    Participant

    Re: EMF

    I believe all electromagnetic radiation dissipates in accordance with the inverse square law, i.e. doubling the distance from the source will reduce the propagated energy by a factor of four

    March 13, 2010 at 9:08 pm in reply to: Comet Service & Customer Aftercare #314324
    johnsdad
    Participant

    Re: Comet Service & Customer Aftercare

    Got to agree with Chezza, I’ve followed 7-8 Comet jobs for icing Samsungs. “We only fit the fuse kit” seems to be the common line. One customer told me The guy said he dosn’t do fridges as he was a pc engineer :hmm:

    March 8, 2010 at 9:51 pm in reply to: Smeg DWI612C fault – not PCB #314345
    johnsdad
    Participant

    Re: Smeg DWI612C fault – not PCB

    with a 500v insulation tester.
    P.S. always UNPLUG when checking, never trust both poles will switch off on a socket

    March 8, 2010 at 9:15 pm in reply to: Smeg DWI612C fault – not PCB #314343
    johnsdad
    Participant

    Re: Smeg DWI612C fault – not PCB

    check appliance for low insulation resistance

    March 3, 2010 at 6:24 pm in reply to: Samsung P1253 error code #313827
    johnsdad
    Participant

    Re: Samsung P1253 error code

    not heating

    February 27, 2010 at 3:45 pm in reply to: Smeg DWI 612 Integrated Dishwasher #313227
    johnsdad
    Participant

    Re: Smeg DWI 612 Integrated Dishwasher

    its the valve that alternates the wash pump outlet between top and bottom spray arms

    February 26, 2010 at 4:19 pm in reply to: Smeg DWI 612 Integrated Dishwasher #313225
    johnsdad
    Participant

    Re: Smeg DWI 612 Integrated Dishwasher

    E8 indicates o problem with alternate valve, not a pcb problem

    February 25, 2010 at 10:24 pm in reply to: SMEG WDI 16BA Error code #313209
    johnsdad
    Participant

    Re: SMEG WDI 16BA Error code

    negative temperature coefficient. Its the one that goes in the dryer duct at the top.

    February 23, 2010 at 8:51 pm in reply to: Smeg oven model F67 #312882
    johnsdad
    Participant

    Re: Smeg oven model F67

    door microswitches also interrupts fan and elements

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 145 total)
1 2 3 4 5 6 … 8 9 10