Forum Replies Created
-
Posts
-
For example if a machine is advertised at£199 through euronics that’s the price it has to be sold at as regards installation through the website that’s the price the customer pays and you can’t charge extra there are probably slightly better margins on exclusive models bloomberg is a big seller through them as you know they are a better beko with 3 year warranty
Just a little from what I know from previously working for a euronics centre they do set the price of what you can sell appliances from them at
Now you can use a stat, toc off a hoover heater if the rating is the same, I hunted for a while to see if I could find the correct stat but as dave as said if it not the correct one buy manufacturer I wouldn’t fit it could lead to more trouble than it’s worth
Yes they did at the time they where having problems with the stat needing resetting all the time, there is probably 2 heaters listed as they went from the old style to new style heater and no stat toc is available even if you go off the full model number it will list 2 and the date code is no help either, what you can do though is take the toc that is around 120 degrees and fit it to the heater
Don’t just clean the duct also check the fan blade on dryer motor isn’t blocked and what I do is take the inlet hose off and use it to wash the fluff away
If the door stays locked and you have changed interlock then it will be the power module I’ve never changed a motor on these
No that’s the part number for programmed module you need the bosch dcu for programming which only bosch engineers have.
Kai
