[kaibart]

You have answered your question that’s is exactly what’s wrong see what the fault code relates too

[kaibart]

Try checking ntc on wash heater I’m sure they had problems related to that fault you have

[kaibart]

So what is wrong with it

[kaibart]

The fault code relates to communication error so I would be inclined to go with power module

[kaibart]

More than likely the facia panel playing up by the sounds of it

[kaibart]

I’ve done one and the door still didn’t close properly after doing it as cabinet was twisted from new right pain to do

[kaibart]

What’s wrong with it ?

[kaibart]

Ok thank you kai

[kaibart]

Have a look in the Instruction manual as you need to access the basic settings to switch on the option for extra dry

[kaibart]

This is the salt chamber/water softner

[kaibart]

All the smeg dishwashers are the same I’m I right in thinking your changing the salt chamber as they leak through the o rings, if it is you don’t need to remove mains cable or inlet fill hose kai

[kaibart]

If its a Siemens washer then it will be power module

[kaibart]

Another day in the life of a appliance repair engineer, it still amazes me that people still don’t t know how to use bleach and a cloth

[kaibart]

It’s a leak into the base of the dishwasher you need to dry the base run the dishwasher and identify where it’s leaking from

[kaibart]

Yes they do have a test programme to test if the heater is coming on its the reset process for f21 but you don’t turn off you turn to either position 5 or 6

[Author]

Posts