Forum Replies Created
-
Posts
-
To get a accurate temperature I have a stainless steel lead with probe that fits into my meter I must do at least 1 temperature test every 2 weeks normally on beko gas cookers which I have to before changing the thermostat
Don if you don’t get no joy with trade parts email diane_pollard@whirlpool.com she got me up and running
There is a problem with the door microswitch I’ve done loads in warranty smeg know there is a issue the hinge doesn’t hit the microswitch lever square and doesn’t de activate the microswitches
No they will send you a password reset and a link to register then it has to be approved then they send you the link to new page sorry
Don your spot on the website is absolutely useless it’s called Whirlpool smart and 1 other thing is the more than 100 percent price increase that they are implementing from next month the also say line drawings are available they are not. The Hotpoint engineer call to fix a new appliance last Wednesday and couldn’t log in to find part numbers for machine so they are having some big problems I think
I don’t know why you have had a problem like this it happened to me on a order I phoned them up and ask if they would resend they did and the part arrived next day and I was credited for the part that didn’t arrive
Would the 2 filters in the door cause this ? As they were not fitted. Also I’ve done some digging and can’t see that I may be able to de activate this clean out airways, would changing the pcb,or removing and cleaning the front duct cause this problem?
In the instructions it does state that the dishwasher should be isolated from the water supply when not in use so if it wasn’t working I can understand him wanting to change it but the price is excessive ot is simple like having a dishwasher and you don’t have a switched socket or fused spur to isolated the electric
Looking at the instruction manual I think it’s a smeg how old is it as the lamona come with 3 year warranty
When the top pcb is changed touch control the selector switch is normally supplied with it and you fit it in a different position as they have had problems with the 59 minute program not working
I would check if they are using powder and how much on which programme as I’ve had the bottom of the pressure switch pipe blocked because people over does also worth checking Sump for blockages if all that is OK will be pcb [IMG2=JSON]{“data-align”:”none”,”data-size”:”full”,”src”:”https://www.ukwhitegoods.co.uk/forums/core/image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==”}[/IMG2]
