Forum Replies Created
-
Posts
-
Normally there is a broken wire when they don’t fill the 2 thing black wires are Normally the culprit
Dave just to comment on this ive spoken to bosch engineer another reason for these to leak are if the customer uses the eco cycle or hot cycle alot in the plastic base type they leak from the sump seal onto motor, the other place they leak from is the diverter valve onto motor this another thing that is worth asking when visiting one of these nightmare dishwashers
I didn’t realise this is a older model which may be fitted with a stainless steel spray arm I would check the o rings at the too of the salt chamber, also possibility that one of the hose can be split
I dont use the jubilee clip that comes with the original heat pump manage to push hose back on i wount use pattern parts on bosch not worth having recalls
There are 4 or 6 10mm bolts holding the duct on and the band that sits on the top of the door seal comes of easy and will go back on easy you dont have to dis connect any wires, and you don’t need to reseal anything if you do have what dave mentioned you can use the water hose that is attached to the machine by turning it on and off and spraying in the condenser
Yes there is a child lock press and hold start button i think it is if not it wills how you in the instructions
