Forum Replies Created
-
Posts
-
The jets are all different and they go into each burner hob, you should be able to work it out by removing 1 at the time and the jet will have a number printed on it so 1 for 1
As dave has listed a link that will explain that the pump listed on this site is for alot of wae model bosch washing machines
Well if the filter cant be removed you can’t be sure that the pump isn’t blocked so yes check this 1st once you have it out shine a torch where you have taken the filter out and make sure nothing is jamming the pump
Does the fan run when you try to ignite the oven ? If not I would go for pcb board,failing that i would be doing an insulation check, also worth checking polarity on the socket its plugged into I’ve had them do all sorts of weird things when there’s a neutral fault, failing all that give stoves a ring and they might put you through to there guy in technical I’ve spoken to technical before
These are the 1st things I would check as these toc ( terminal overload cutout) are the most common fault on these oven
We will need the all important model number off cooker this can either be found on the back of the cooker or if you pull the both flap down there may be a sticker with model number on
Have repair done by them as it will be either a power board or a slave board and I know they change both
Cheers dave that’s the one I came up with on aswo just want to double check now that’s all had wrong module sent to me by connect
This is a baumatic gas oven badged lamona not many parts listed and very difficult to get correct parts for
