Forum Replies Created
-
Posts
-
Re: Bosch dishwasher
My pub would definitely be faulty if I paid that price Martin lol that’s what predictive text does. Thank you for help il give it a go for some reason Bosch d/w allways get the better of me.
Re: Neff d/w water tap flashing
Just a update on this dishwasher I’ve been back to it today and found the float microswitch is faulty,after changing the drain pump contact for the flow meter and a pcb. Kai :rolls:
Re: Hotpoint WMA74 drum issue.
Maybe some help to you when changing the spider I have never failed to remove the the torx bolt that Dave says to drill out u use a copper mallet and shock the bolts and they will come out even if you have to do this more that once hope this assists you Kai
Re: Grundig(Beko) Dishwasher GNF41810B Fills and Stops?
That’s exactly what I got caught out on wire to flow meter
Re: Bek o dsfn1530b console
May have round holes on new console and square buttons on old 1 and you will probably need new decal as it wount stick back on properly
Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer
Buy the time you fix this dryer he could of bought a new 1 the money the customer has spent on parts lol.
Re: Candy 10Kg condenser dryer GVCD10WB
Yes if they are putting in baby’s bibs or synthetic items this will definitely happen customer probably need educating on how to use,would not be a fault with the working of the dryer
Re: Bek o dsfn1530b console
Yes screw under where the buttons sit the decal needs to come off be aware the buttons are different on new facia I’ve had this problem on the same model in black. Kai
Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer
Hi jonty I attach a wiring diagram for you more than likely the new pcb needs programming with men loader Hoover has, this condenser has 2 ntcs 1 on the front duct and 1 under the drum in the rear left i would suggest fitting all the old parts back on and starting from scratch as the old pcb is probably fine, its always a head ache when customers try to fix themselves. Kai
