Forum Replies Created
-
Posts
-
If the machine is leaking on the left hand side the only hose at the front is what they call the fill house at the bottom of the powder draw it attaches to and it is no longer available you can check on drawing it either 087326 or 086314 it’s on page 4
I personally would lubricant the top springs and change the dampers as kwatt has said as bosch do have issues with these don’t think it will be belt and oil seal very unlikely
You are checking if the compressor is working correctly to do this you will need something you can plug I to see how many Watts are getting pulled when the on p2 test forget all the other settings if you have 350w then the compressor is working correctly
P2 is compressor test you should have min 350w by the time it stops on it own if you haven’t no repair possible
Simple thing to look at here read whats in the ingredients surfactants optical brighteners etc and the amount of them in the pack
Try doing a full defrost on it could be ice starting to build up around the fan in the freezer min 48 hrs unplugged doors open fully then you should be back to normal
The WiFi connection is essentially a raspberry pie which is a computer so connect it up as it will need to update from time to time same as our phone and tablets this is across all new bosch neff Siemens range of products now unfortunately :rolleyes:
This is the new WiFi hob if I’m correct it will do this the dishwashers do it aswell all the lights stay lit for at least a minute or 2
These hotpoint and indesit dryer platforms give us plenty of work and keep us busy and easy to work on it will be a big loss i do agree they are not built well but what is today
Yes thats the cleaning product haven’t had any feed back off it yet but it does show you how to get into the test cycle in the instructions you can test the compressor on p2 setting if its pulling over 350w then compressor will be fine
E90 is a power module fault and bosch sell a cleaning product for the self cleaning condensers and it tells you how to put it into service mode
00631200 is the only one used from 2015 before that there was a 997 pump used aswell only 2 different drain pumps where used only that 31200 pump on all new models haven’t changed one in a long while, but I would fit genuine
