kaibart

Forum Replies Created

Viewing 15 posts - 1,066 through 1,080 (of 1,334 total)
  • Author
    Posts
  • in reply to: Candy Dishwasher tripping the RCCB Switch #447693
    kaibart
    Moderator

    Re: Candy Dishwasher tripping the RCCB Switch

    There are 3 main components which normally cause this problem 1 a mains filter where the lead enters the machine, 2 the heating element, 3 the wash pump motor.
    But I would check if the dishwasher has a leak 1st

    in reply to: Hotpoint FDUD 43133 P LCD replacement #447683
    kaibart
    Moderator

    Re: Hotpoint FDUD 43133 P LCD replacement

    Unfortunately the part isn’t available separate it comes complete with new pcb that’s why you are having trouble trying to find the part and it not cheap either Kai.

    in reply to: Logic w/m #447613
    kaibart
    Moderator

    Re: Logic w/m

    Have watched that there are 2 standpipes behind machine 1 which is trapped and 1 which isn’t advised customer to leave pipe in the trapped standpipe.

    in reply to: Logic w/m #447610
    kaibart
    Moderator

    Re: Logic w/m

    Customer is adamant there is a leak from underneath the machine and only happens on certain programmes this has been run in the workshop 7 times on different programmes and I’ve stayed in the house and watched it through 2 15 min programmes without a leak I think customer is trying it on to get a exchange.

    in reply to: Beko DRCS76 Still Damp at End of Cycle #447550
    kaibart
    Moderator

    Re: Beko DRCS76 Still Damp at End of Cycle

    I now this might sound silly but have you changed the cycle you use on your washer? A extra spin on your washer will help. Kai

    in reply to: Lamona hja8704 over fill #447541
    kaibart
    Moderator

    Re: Lamona hja8704 over fill

    I would change the valve then it’s a Hoover machine

    in reply to: Beko drcs70w stops #447526
    kaibart
    Moderator

    Re: Beko drcs70w stops

    Don’t think that’s the right model number but I would be looking at the pcb

    in reply to: NESN In Liquidation? #447492
    kaibart
    Moderator

    Re: NESN In Liquidation?

    Yes they have just before they pay on the 9th of every month typical and who’s got the contract 0800 kai

    in reply to: LG F14A8Q/TD #447431
    kaibart
    Moderator

    Re: LG F14A8Q/TD

    You will need a insulation tester to find the problem but I will hazard a guess at the filter coil pcb this is where the mains power inters the machine but to confirm this you need to test with insulation tester kai

    in reply to: Bosch WTA74100GB/09 #447411
    kaibart
    Moderator

    Re: Bosch WTA74100GB/09

    The rear ntcs do fail airflow is key on these Bosch dryers make sure the vent hose has a straight run of as least 450mm before a bend in the hose or this will definitely cause issues kai

    in reply to: Appliance Refurbishers in Cardiff #351870
    kaibart
    Moderator

    Re: Appliance Refurbishers in Cardiff

    Is there anywhere that will take refrigeration away or where I can dispose near my postcode for free Cf349te and is the anyone after raw or reconditioned appliances. Kai

    in reply to: Bosch washer #447350
    kaibart
    Moderator

    Re: Bosch washer

    Turns out it was a door lock 😀 😀

    in reply to: logik L614WD13 Belt #447360
    kaibart
    Moderator

    Re: logik L614WD13 Belt

    This is the part number on connect CRY0020300609 it’s a 1121 j5 belt kai

    in reply to: candy washing machine dead #447362
    kaibart
    Moderator

    Re: candy washing machine dead

    The main module will be faulty then please post 31 number which is 16 digits if you would like the part number kai

    in reply to: Bosch washer #447348
    kaibart
    Moderator

    Re: Bosch washer

    Machine is a nightmare to get out going back tomorrow will have a good look

Viewing 15 posts - 1,066 through 1,080 (of 1,334 total)