Lawrence

Forum Replies Created

Viewing 15 posts - 211 through 225 (of 2,138 total)
  • Author
    Posts
  • in reply to: SAMSUNG WF90F5E3U4W/EU MOTOR STAMMER #441358
    Lawrence
    Participant

    Re: SAMSUNG WF90F5E3U4W/EU MOTOR STAMMER

    We used to change motor and PCB

    in reply to: grandimpianti ERE83 dryer #441302
    Lawrence
    Participant

    Re: grandimpianti ERE83 dryer

    http://www.searspartsdirect.com/part-nu … 6/250.html

    Or JLA 01422822282 use the RSPC511957 as your part no

    in reply to: LG F1480TDS stops after 6 minutes and blows the rcd #441194
    Lawrence
    Participant

    Re: LG F1480TDS stops after 6 minutes and blows the rcd

    Concur with Dave ,it’s the element ,unplug ,back off and heater is at the bottom of the tub (6oclock)

    in reply to: Can it happen here ? #441130
    Lawrence
    Participant

    Re: Can it happen here ?

    Its the one thing that could make repairs viable overnight,mind you they are only viable if we can get the spare parts..

    in reply to: Rangemaster sparking problem #441150
    Lawrence
    Participant

    Re: Rangemaster sparking problem

    It will need the FSD which is not a DIY job as its a gas carrying part ,you need to find a gas safe registered repairer.

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431541
    Lawrence
    Participant

    Re: Whirlpool to do a recall on Hotpoint dryers

    Frankly anyone that veers even slightly of the prescribed modification procedure needs to think VERY carefully about the insurance implications as if one went up post mod and it was proven it hadn’t been modified correctly then they wouldn’t have a leg to stand on.
    And further more once the lawyers had finished neither would they have a pot to p@$$ in

    in reply to: Samsung RSH5 lost part number #441089
    Lawrence
    Participant

    Re: Samsung RSH5 lost part number

    DA81-01097C supt kit

    in reply to: Beko DW602 Dishwasher #440981
    Lawrence
    Participant

    Re: Beko DW602 Dishwasher

    power off and plug out ,remove the outer door panel look at where the cables go under the door at the bottom ,you are looking for 2 thin purple wires one of them will be broken.

    in reply to: 6mm2 cooker cable to terminal on cooker. #440997
    Lawrence
    Participant

    Re: 6mm2 cooker cable to terminal on cooker.

    you dont wrap it round you push it under

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431534
    Lawrence
    Participant

    Re: Whirlpool to do a recall on Hotpoint dryers

    In my opinion all appliances have one weak link ,that being the consumer.

    in reply to: SAMSUNG – MARTIN DAWES #436894
    Lawrence
    Participant

    Re: SAMSUNG – MARTIN DAWES

    We finished with them last sept but have still had a couple of jobs come through

    in reply to: Smeg SS55PTE3 fridge freezer water connector #440856
    Lawrence
    Participant

    Re: Smeg SS55PTE3 fridge freezer water connector

    or if you know what the size is at both ends you can pick up connectors on Ebay ,Ive just got one for a Daewoo SBS

    in reply to: Samsung Eco Bubble WF1804WPU #440799
    Lawrence
    Participant

    Re: Samsung Eco Bubble WF1804WPU

    This fault used to be a pain in the rear,it’s normally overdosing with detergent but getting the Cust to accept it is difficult.
    It’s a digital pressure switch so is quite sensitive.
    We have changed the sump hose and pressure system with varying degrees of success

    in reply to: LG dishwasher D145BF #440795
    Lawrence
    Participant

    Re: LG dishwasher D145BF

    Many thanks

    in reply to: Hotpoint Tool Case 19 #440386
    Lawrence
    Participant

    Re: Hotpoint Tool Case 19

    I kept breaking zips on the magma ,now on 2nd parat case in 10 years.

Viewing 15 posts - 211 through 225 (of 2,138 total)