Forum Replies Created
-
Posts
-
Re: Aqualtis/Hotpoint Washer Dryer Tripping Breakers
check the elements ,failing that you need an engineer
Re: Testing a drain pump on a dishwasher
when you first put the dishwasher on the pump should run ,have you checked that the impeller is revolving okay and not obstructed ?
Re: ISE W288eco squeaky bearing.
Take the pulley off ,push the shaft in as far as it will go then refit the pulley ,put powder in and put on a 90deg
IRe: Tecnik TKC1285C 6 hob cooker fan element faulty
yeah same as one of the diplomats made by a company called sarena I think.
Back off remove the wadding which reveals screws which hold the fan element and fan motor.on a plate if I recall.Re: samsung RSH1DBBP fridge dain blocked
OR remove the rubber flap on the end of the drain tube and put your steamer nozzle up there and have a cup of tea- eventually it will shift
Re: Whirlpool Top loader tap adapter
the other thing to do is find out the thread sizes and create your own from a merchants
Re: HOWDENS LAMONA ?
Run – call rate £50 from memory if it’s exchanged or written off you get £5 -that’s not a typo.
Lots of integrated refrigerationRe: Element replaced , not working, different
I don’t think you will be able to return as you have used the part
Re: BEKO control module
Slightly off topic ,but that reminds me of a farmhouse I went to that was fed by its own supply from the grid ,the power surge had blown every appliance but had also melted the wiring in the wall.all you could see were strips of scorched cabling bursting through the plaster
