litlor

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 164 total)
  • Author
    Posts
  • in reply to: Din15310 #485767
    litlor
    Participant

    Yes power to machine no lights on the display checked PCB no flash marks I have no technical information on this appliance. Any help would do thank you

    in reply to: Hotpoint DF61 D/W heater box leak? #180986
    litlor
    Participant

    Re: Hotpoint DF61 D/W heater box leak?

    Done loads of these do the same as gegsy suggests but turn the dishwasher upside down remove the base all components are accessible 30-40 min job. EASY

    John

    in reply to: British Gas #179848
    litlor
    Participant

    Re: British Gas

    Loads of BERs

    litlor
    Participant

    Re: Ariston Margherita A1535 – Problem – Urgent Help Require

    Bob

    Your right im wrong sorry for the wrong info


    John

    litlor
    Participant

    Re: Ariston Margherita A1535 – Problem – Urgent Help Require

    The motor is controlled by a high voltage capacitor this job should be only done by a professional am afraid, try contacting repairs@ to see if there’s a local engineerin your area. power off if you attempt this yourself

    in reply to: Regassing tumble dryers #172264
    litlor
    Participant

    Re: Regassing tumble dryers

    The next thing they will be using gas

    in reply to: Ariston Cooling fan #157132
    litlor
    Participant

    Re: Ariston Cooling fan

    Dave: Thanks very much

    Cheers John

    _____________

    in reply to: Ariston Cooling fan #157130
    litlor
    Participant

    Re: Ariston Cooling fan

    Dave that is the model number 208588014 the serial number is 00770453 as taken from the spec plate SEME list that model but have no parts listed

    Cheers John


    _______________

    in reply to: Zanussi WJS1397W prod. 914639503/00 #152402
    litlor
    Participant

    Re: Zanussi WJS1397W prod. 914639503/00

    check that nothing is down to earth or the most common fault is not draining

    in reply to: Zanussi FJ1093 Fills slowly! #149989
    litlor
    Participant

    Re: Zanussi FJ1093 Fills slowly!

    Remove the inlet hoses check the water is coming out quick enough also check the inlet valve filters which could be restricted

    in reply to: Whirlpool Dishwasher ADP 5966 #149556
    litlor
    Participant

    Re: Whirlpool Dishwasher ADP 5966

    Brian

    F7 points to water inlet pipe check there to


    John

    in reply to: Whirlpool Dishwasher ADP 5966 #149554
    litlor
    Participant

    Re: Whirlpool Dishwasher ADP 5966

    Check if its heating the water also check top spray arm for blockage covers both F3 and F5 codes


    John

    in reply to: Help on old Zanussi washer #148156
    litlor
    Participant

    Re: Help on old Zanussi washer

    Hi Mark the photo of the old pump is a plaset so the pump you have now fitted (Askoll) should work ok as the last post suggests look for restrictions like a coin

    in reply to: Help on old Zanussi washer #148153
    litlor
    Participant

    Re: Help on old Zanussi washer

    Looking at the pump housing on this Zanussi you need a drain pump mod part number 50247950004 this is a askoll pump kit that replaces the old sole pump
    Hope this helps


    John

    in reply to: Tricity Ben’ 551 T’D no motor action #148610
    litlor
    Participant

    Re: Tricity Ben’ 551 T’D no motor action

    yes its a 8mf part number 344091004

Viewing 15 posts - 1 through 15 (of 164 total)