litlor

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 164 total)
  • Author
    Posts
  • in reply to: Just fried my Brandt/Blomberg Washing machine #144254
    litlor
    Participant

    Re: Just fried my Brandt/Blomberg Washing machine

    Need model number please also how did you get 380volts???

    in reply to: Indesit CG1230 Fridge/Freezer – Fridge not cooling #144264
    litlor
    Participant

    Re: Indesit CG1230 Fridge/Freezer – Fridge not cooling

    Sounds like loss of refrigerant or poor pumping compressor you need to call in a Refrigeration engineer put in your postcode in repairs@

    __________________

    John

    in reply to: Any advice re replacement machine? #143979
    litlor
    Participant

    Re: Any advice re replacement machine?

    Buy German Buy Bosch Quality Machines

    in reply to: Electrolux ER7620 larder fridge – frost problem #143663
    litlor
    Participant

    Re: Electrolux ER7620 larder fridge – frost problem

    Hi Paul

    Not a hard job to replace thermostat if not sure call in a engineer we charge around £55 to supply and fit but prices vary from company to company try Repairs@ if you have a go yourself Power off first


    _____________________

    John

    in reply to: Hotpoint 8326 fride/freezer dead? #143942
    litlor
    Participant

    Re: Hotpoint 8326 fride/freezer dead?

    ok but if you have a go yourself do not forget Power off first

    _____________________
    John

    in reply to: Hotpoint 8326 fride/freezer dead? #143940
    litlor
    Participant

    Re: Hotpoint 8326 fride/freezer dead?

    Its probably only the thermostat open circuit not a expensive repair get a engineer to check it try Repairs@

    ______________
    John

    in reply to: AAAAAaaaaarrrrgggghhh!!!!!!!Zanussi door seal. #140052
    litlor
    Participant

    Re: AAAAAaaaaarrrrgggghhh!!!!!!!Zanussi door seal.

    I wrote earlier in this forum how I had no problem fitting Zanussi door retaining springs but yesterday I had to fit a door seal to a BEKO, bigger seal than the Zanussi and could not fit the spring on, nearly got it on then off it came then I remembered what Bryan and r600a said about the screwdriver through the door interlock latch plate worked like a treat 1st time thanks for a good idea guys (see you can still teach a old dog new tricks)

    ________________
    John

    in reply to: HOOVER TCE61 Filter light no HEAT #140642
    litlor
    Participant

    Re: HOOVER TCE61 Filter light no HEAT

    Im 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure the problem is only the heater pack obviously I would check this with my meter at time of the call, but as iadom says we can only surmise about the fault
    Good luck


    ____________

    John

    in reply to: Electrolux ER7620 larder fridge – frost problem #143661
    litlor
    Participant

    Re: Electrolux ER7620 larder fridge – frost problem

    Sounds like thermostat problem and its not a expensive repair

    John

    in reply to: idesit cg 1305 f/f not working #143455
    litlor
    Participant

    Re: idesit cg 1305 f/f not working

    Its engineer time I am afraid sounds like a system fault poss. loss of refrigerant

    John

    in reply to: idesit cg 1305 f/f not working #143453
    litlor
    Participant

    Re: idesit cg 1305 f/f not working

    Yes the motor on the back is the compressor next question can you hear it running or is it making any clicking noises is the black grill (condenser) warm??

    in reply to: u1421w0gb/01 #143450
    litlor
    Participant

    Re: u1421w0gb/01

    your main oven Thermostat needs to be replaced, Power off when testing please

    in reply to: idesit cg 1305 f/f not working #143451
    litlor
    Participant

    Re: idesit cg 1305 f/f not working

    It sounds to me like you have brought a duff fridge/freezer (compressor faulty) can you hear the compressor running is it warm to touch if not you will need a engineer to look at it or another fridge/ freezer

    in reply to: SMEG dishwasher problem #143428
    litlor
    Participant

    Re: SMEG dishwasher problem

    Model number is usually around the door frame or on the door surround on some machine its behind the décor door
    hope this helps

    John

    in reply to: Diplomat ADP 8132 not filling (and cracked door) #143375
    litlor
    Participant

    Re: Diplomat ADP 8132 not filling (and cracked door)

    Sounds like pressure chamber/system blocked

Viewing 15 posts - 31 through 45 (of 164 total)