Forum Replies Created
-
AuthorPosts
-
macmini
ParticipantRe: How much would it cost to make a Servis washer?
General profit margins on whites (mid/top range) is 30{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, i’d expect there to be practically nothing in cheaper end.
macmini
ParticipantRe: indesit tumble dryer IS60V or30629
iadom wrote:Could also be capacitor or motor fault, no heat may have been caused by one shot stat tripping out due to no motor action, have you tested the stats, elements & capacitor?
Jim.
PS. Edited the title for you macmini 😉
Half way there Jim, now says 1S60v 😉
macmini
ParticipantRe: indesit tumble dryer1560v or30629
Just for the fellow engineers here, the model is IS60v, and from my limited knowledge, i’d check the start relay 😉
macmini
ParticipantRe: Zanussi Door Opens during a cycle
This is the 3rd Zanussi post i’ve seen in about as many weeks, allowing the door to be opened when the machine is running!
Not good.
macmini
ParticipantRe: How many washers are left with hot valves?
Many of the cheaper LG’s are still H/C fill.
macmini
ParticipantRe: Indesit Washing Machine WI 101(UK) 8 Flashes
Martin wrote:
macmini wrote:
I wouldn’t be surprised if the PAT test had caused it, i’ve known PAT tests cause problems with all sorts of machinery and electronics over the years, WM aren’t designed to be tested, and aren’t portable so shouldn’t require it!What are you on about?
Washing Machines/Dishwasher/Friges/Ice makers etc especially have to be PA tested in commercial premises regularly. Health and safety at work and all that good stuff. 😉
And no way does PA testing cause faults on a machine that weren’t already there in the first place. Hence it would show on the Inspection report!
Sorry Martin,
Just going off my experience when it came to desktop CAM stuff, which, every single time (we had four portable machines), failed PAT test and never worked again.
All perfectly fine after PCB replaced, but, for some reason, a PAT test blew them!
Assumed it might be similar, but, hey ho…
macmini
ParticipantRe: WHICH MACHINE SHOULD I BUY
You can get a Miele Premier 520 for that price, no delay time, but otherwise a very good machine.
macmini
ParticipantRe: Indesit Washing Machine WI 101(UK) 8 Flashes
I wouldn’t be surprised if the PAT test had caused it, i’ve known PAT tests cause problems with all sorts of machinery and electronics over the years, WM aren’t designed to be tested, and aren’t portable so shouldn’t require it!
macmini
ParticipantRe: Candy’s new recipe for disaster?
Penguin, you should know i’m a young lad and wouldn’t know that!
macmini
ParticipantRe: Does anyone remember these?
Very nice Don, how old is it?
November 14, 2006 at 12:06 pm in reply to: Samsung B1415J Big Wash.Going thru motions, but not washing! #195371macmini
ParticipantRe: Samsung B1415J Big Wash.Going thru motions, but not wash
Put the belt back on and see if the problem is solved.
macmini
ParticipantRe: Advice on Hoover 8kg washer
…or it’s Candy or Hotpoint equivalents.
macmini
ParticipantRe: Hotpoint CTD80 drier – fault F09
Both the three or five year warranties where i work are much cheaper than Hotpoint’s £90 labour charge!
Hardly what i’d call a stitch up.
macmini
ParticipantRe: What happened to Quality?
In my experience, customers come and buy an Indesit at £200, and come back 2yrs later and buy another Indesit, and so on.
Why? Why do they do this?
macmini
ParticipantRe: New Hotpoint Washing Machine in……
Martin wrote:
gegsy wrote:
Ok, brand new, on display some in wrapping, just bare cable no plug on the end of cableI think if you check with the manager of the store in question, those machines are classed as ‘showroom models only, not for re-sale’.
So are these standard, working machines just without a plug?
-
AuthorPosts
