Martin

Forum Replies Created

Viewing 15 posts - 22,306 through 22,320 (of 25,534 total)
  • Author
    Posts
  • in reply to: bosch logic 9 #147773
    Martin
    Participant

    Re: bosch logic 9

    tonyclifton wrote:need interlock for above machine cant find it listed

    I’m not surprised with only those numbers to go on 🙄

    in reply to: Safety Issue on Hotpoint Dishwashers #147712
    Martin
    Participant

    Re: Safety Issue on Hotpoint Dishwashers

    First I’ve heard of this Bob!

    To what models specifically do you refer to anyway I wonder :con:

    in reply to: Bosch WTE6920GB/01 T/D cuts out #147746
    Martin
    Participant

    Re: Bosch WTE6920GB/01 T/D cuts out

    Blocked pump hose to water tank. Take hose connection off the back and at the water tank end and I am sure that pipe or the nozzle are blocked with something 😉

    I bet if you slide the condenser unit out and feel at the back that there’s water in the channel that lies behind…dead giveaway! 🙂

    in reply to: Blomberg #147698
    Martin
    Participant

    Re: Blomberg

    Bill,

    You are a TRADE MEMBER are you not? Why then did you post this in the Public Forums I wonder?

    in reply to: servis #147681
    Martin
    Participant

    Re: servis

    Yes indeed….Recon Module from EMW will sort it. Give Tony a bell and he will pop a replacement in the post to you tonight :tup:

    in reply to: zan, BLOWING PUMPS #147651
    Martin
    Participant

    Re: zan, BLOWING PUMPS

    pmb wrote:any ideas, 😕

    What model? What pump? (wash or drain pump) :con:

    in reply to: Wire AWZ650 thermostat kit #147660
    Martin
    Participant

    Re: Wire AWZ650 thermostat kit

    lgflynn wrote:all the wires were unpluged.

    Who did that and why? What wires can’t you figure out anyway?

    in reply to: Zanussi TDS383W Tumble Dryer #147669
    Martin
    Participant

    Re: Zanussi TDS383W Tumble Dryer

    Usually the rear bearing wears (Part No 1250134119)and the front drum support felt (1250028055) also. Needs a bit of expert TLC to fit these but a simple enough and cheap job for a local independent to sort for you. Try our Repairs@ to see if there’s one in your area?

    If you want a crack at it yourself, good luck and you can order the spares (giving the above part no’s) to spares@ukwhitegoods.co.uk

    in reply to: Look at what you’re missing #129061
    Martin
    Participant

    Re: Look at what you’re missing

    Sorry it’s not razor then by all accounts, maybe it’s rocker I’m thinking of, or some such name (lives in Kingston, anyhow)

    Whatever! :con:

    in reply to: Bosch inlet valve banging #147582
    Martin
    Participant

    Re: Bosch inlet valve banging

    Yes indeed, a blockage in the inlet to the sump is the likely problem and if you are the least bit unsure how to proceed, I recommend calling out a local engineer. Try our
    Repairs@
    to see if there’s is one in your area 😉

    in reply to: Bosch SGS6312GB/07 #147546
    Martin
    Participant

    Re: Bosch SGS6312GB/07

    If the insulation is down on the main circulating pump (even slightly – 100megs or so) it can cause the board to do a wobbly 😕

    in reply to: Look at what you’re missing #129058
    Martin
    Participant

    Re: Look at what you’re missing

    Dave_Conway wrote:If any of you guys reading this cover Surrey

    Doesn’t razor cover parts of Surrey? :con:

    in reply to: Amusing Anecdotes & Other Tales #113740
    Martin
    Participant

    Re: Amusing Anecdotes & Other Tales

    I got a call in a less than salubrious part of town, rang the doorbell and a huge bloke answered the door. He looked like a cross between Mr T and Odd-Job with his shaven head, earrings and eyebrow piercings. He smiled, stood back to allowed me in then shouted over his shoulder with a voice like Dale Winton’s………….

    “…….Ooooohh Adrian! Its the lovely man who’s come to fix our wishy-washer thingy! 😯 🙁 😯 🙁

    in reply to: Indesit W12SUK #147228
    Martin
    Participant

    Re: Indesit W12SUK

    andy2 wrote:Maybe this is my first step to recovery from the morbid fascination which
    has ruled my life for what now seems a lifetime………endless nighmares………..a dreamworld filled with flashing lights and endless clicking noises that fill my ears and my mind until it seems that I can endure no longer……………

    Calm down old chap, get a grip, anyway, what clicking noises??? :rotl:

    in reply to: Parts Center Website #143525
    Martin
    Participant

    Re: Parts Center Website

    eastlmark wrote: but the point I was making was that you cannot save a single line

    Indeed so, I cannot figure that either (and spookily enough, I often fill in odd orders with a Hotpoint brush or too as well – funny that 😆 )

    But seriously though, lets face it, I cannot see where the hell or what the hell they are possibly going to do to improve (or even add to) the existing website. It is after all the most appalling bad piece of software that is as archaic as Windows95 is to Broadband. 🙁

Viewing 15 posts - 22,306 through 22,320 (of 25,534 total)