Forum Replies Created
-
Posts
-
Re: random photos
I’m the shaven haired intelligent looking, smartly dressed one 8)
http://www.ukwhitegoods.co.uk/modules.p … _photo.php
Martin
Re: mould in my WF02865Bosch
A bottle brush will help, otherwise simply using the dispenser (which I suspect you don’t perhaps?) will help 🙂
Martin
Re: Oi, stop it!
I have always maintained that Dave, who doesn’t say much lets be fair, but when he does it’s fucking priceless!
:rotfl: :rotfl: :rotfl: :rotfl:
Martin
Re: A Special day for Bosch ????
TRoberts wrote: incidentally I am in sk8 postcode area Cheshire
Tony,
Please could I ask you to put your contact address in the “Directories” for future reference/custom 😉
Thanks!
Martin
Re: Zanussi FJS1397W No Motor action
Had one of these today with exactly the same fault. It was indeed the Relay terminal on the Module burnt away on the PCB (as Ray suggested earlier). Cleaned the terminal up, blob of solder and away it went 😀
Martin
Re: Oi, stop it!
Alex wrote:I’m sorry to say this, but I suspect some of the credibility of this site may have become tarnished due to this.
…..Hear!…Hear!……too much gobbing off does no good whatsoever. I know each and everyone of you has a good, and in most cases, valid point to make, but as I commented earlier in this thread (perhaps a little bit of character for me I know but)……..
martin wrote:…its just like a load of kids fighting in a Junior School playground…. ….ffs….
The trade must me totally bemused by now from what they are reading 🙁
alex wrote:Why doesn’t everyone just keep their heads down and see what happens?
Yes lets!!!!!!!!
Martin
Re: Bosch WFR2460gb01
Mark,
Sump Ball Valve sticking maybe ❓ They suffer just like the Hoover New Wave do in that dept 😉
Martin
Re: mould in my WF02865Bosch
Russell,
You are probably using to much detergent, powder I feel is better than liquid 😉 . Clean the dispenser as suggested and run the machine on a 60 degree wash once in a while with 3 tablespoons of Barcarbinate of Soda in the drum!!
Using the dispenser with powder will cure the dispenser smell very quickly also. Clean behind the folds of the door seal adjacent the inner drum too 🙂
Martin
Re: rumours
Richard,
Believe me this topic will run and run as it has done all over this site since its appearance in June last year. The central core of the correspondents are Pro-DASA with an eclectic mix of ideas, some enthused for its future and others that believe it hasn’t one.
It’s best the likes of you and I simply sit back and watch what happens. I already have got to the last chapter of the book and know how the story ends. But I won’t spoil it for those that are only half-way through 🙂
Martin
Re: I think Kwatts wrong
😕 Energy efficiency labels ❓ Surely Kens not got that wrong as well as he?
Please explain a little more so the elderly (me & rs that is) can grasp it too 🙄
Martin
Re: Oi, stop it!
….I forgot
Delete the “rumours” thread totally as well… 👿
…its just like a load of kids fighting in a Junior School playground….
….ffs….
Martin
Re: Oi, stop it!
FFS!!!!!!!!!
Will you boys stop fucking about on this DASA theme, it is really dragging on now.
I have sod all to do with this thread and tell me to piss off if you wish, BUT honestly…Give it a break!
Be fair here, DASA are desperately trying to make good, give Mark and his team a bit of space here P-L-E-A-S-E!!! 🙁
…….. GENTLEMEN…..may I remind you…..that we are all on the same side here 😉
Martin
Re: Zanussi 1265
Mike,
For a manual…go check out my posting at the top of this forum (Instruction Manuals)
Then give me the full and correct model number (off the fascia panel R/H/Side usually) and I will try my best to help 😆
Martin
Re: Spare parts for AEG 65300 K Ceramic Hob
Jamie,
It’s over £200 !!!
Are you sure it isn’t simply that you have used the wrong cleaner on the ceramic glass 😕
Tip: Clean entire surface with a mild solution of washing- up liquid and water on a J cloth, then dry off completely with a paper kitchen towel. Then rub over with a clean/dry tea towel and try it again :tup:
Fingers crossed 8)
Martin
