Forum Replies Created
-
Posts
-
Re: Remote Engineers
Sounds good, but are the collection centres really just 10 to 15 mins away for most of the ‘remote’ guys here in the UK?
Martin
Re: A Tall Tale
What can I say about our Scottish friend :scots: that hasn’t already been eulogised so many times before 😆 ….but now we have to give him yet another Scout Badge…”Cunning Scriptic!” :rotfl:
…..can’t wait to read the bit…..”and they all lived happily everafter!”
:rotfl:
Martin
Re: Did You Know This?
appboy wrote:I am alittle annoyed to say the least! 👿
To put it mildly I’m sure 😯
…and a sad and costly lesson to learn for all employers. Perhaps also highlighting a need to put a few additional clauses in an employees work contract 😉
Martin
Re: HOTPOINT wm
Simon46 wrote:Does that mean all the ones ive fitted will end up melting?
Not necessarily Simon, but it is always a good idea to run test the new brushes under load. (Ask your customer for a couple of bath towels and try a rinse and spin) That will bed them in nicely too 🙂 No point either in changing brushes if you have an armature with any insulation reading below 20megohms 🙄
Also remind your customer to give the machine a bit of a break between washes of about 10 minutes. That tip alone will cool things down and prevent recalls 😉
Martin
Re: A8754 tumble fault
Tony,
Well I will give you 10 out of 10 so far for trying 🙂
Its got to be a connection to tacho problem surely 😕 Those motor plug connectors (the crimped jobs) are very suspect at this stage I reckon 💡 But I’m sure you must have given them a good tug whilst it was tumbling normally, if not, try just that 😉
You’ve changed the Timer/Module Unit and Motor to no effect so it has to be a connection between the two….hopefully
Fingers crossed for you 🙂
Martin
Re: A Vision of the Future?
Another blinder from the flightless one….. 😆
:rotfl: Roll on UKW5 :rotfl:
MartinRe: Did You Know This?
appboy wrote: DVLA had sent two recorded delivery letters to his home and he had ignored them,
That’s the bit that puzzles me? and I am sure you must have asked him …”WHY?”
Martin
Re: Scholtes LV 12-664 Dishwasher.
Dave_Conway wrote: which is presumably why Martin steered AireBase toward the Mother Company.
Exactly that reason Dave 😉 Could possibly even be another ‘clone’ from someone else’s stable 😕
Martin
kwatt wrote:Or Dave should be able to get spares for Scholtes. 😉
True enough 🙂 …here’s another option :-
Martin
Re: Scholtes LV 12-664 Dishwasher.
AireBase wrote: Where can I get one of these from?
Try:-
http://www.merloni.com/pages/en/products/products_service.jsp
MartinRe: Scholtes dishwasher (LV12 – 873S)
Try this link:-
http://www.merloni.com/pages/en/products/products_service.jsp
Martin
Re: Credit Card Processing?
8) Cool 8)
Meanwhile, thoughts from others??? Does anyone here use these gadgets already I wonder???
Martin
Re: HOTPOINT wm
Tony,
The armature is duff mate (drawing too much current) and I expect if you megger/metrohm across the commutator it will have poor insulation readings too 🙁
Check the pump/sump trap too as a matter of course, but my guess is closer to home 😉
Martin
Re: Hotpoint WMA60P
Toni,
When a programme is selected and you press the start button, the first thing the machine should do is PUMP. It is normally energised for 5 seconds and then the machine should fill. Do check the pump out, it may be your trouble and the micro processor is going into error mode as a result. 😉
You can also perform a ‘Last Error Detected’ interrogation on those machines but that takes some explaining really and possibly I could help you on that if your stuck 🙂
Best of luck
Martin
