Forum Replies Created
-
Posts
-
Re: Changing main control board on Zanussi ZJ18 help with l
Tip of the day: Don’t buy a board from eBay unless you can afford to be disappointed and unable to get a refund.
Re: Bosch SMS4472GB sticking in the wash cycle
I refer to the water heating element not the dispenser. Is the water getting hot?
Re: Hotpoint Aquarius VTD00P – Repaired all bearings, now dr
I’d take the latter option if I were you. 😉
Re: Bosch SMS4472GB sticking in the wash cycle
The problem will not be with the timer. The timer is controlled by several components that ‘advance’ the timer once their function is completed ( i.e. Water level microswitch on filling. Thermostat on reaching temperature etc).
Re: candy gv138d3/1-80
Andy jones wrote:Maybe clamp not right enough
Oh the blame is pointed squarely at the clamp ring “right enough”I would imagine. 😉
Re: Hotpoint Aquarius VTD00P – Repaired all bearings, now dr
A new stretch belt (9 rib) is must. But these dryers are built much like an old biscuit tin and unless the frame is aligned it will grind, rumble and rattle like a Centurian tank on an assault course during war games!
Re: New Work Light
Rolson 24 LED maglight available at all 99p stores nationwide. Pack of 24 replacement mercury cells just 99p. 8)
Re: Noisy Bosch W5420XGB07
It’s a NEFF not Bosch and have you checked the magnet on the drum pulley?
Re: ID cards
Why didn’t you ask the question in the dedicated WTA forum instead of the public forum? 😕
Re: Neff dishwasher S51E50X1GB/03
You might want to check out the door springs.(The clue is in the fact your customer says the door appears heavier than before). Also the nylon door pivot bearings are prone to wear which will misalign the door. Finally, decor door panel and/or levelling issues will all create those symptoms.
Here’s the SP on the door springs……
