Martin

Forum Replies Created

Viewing 15 posts - 3,916 through 3,930 (of 25,534 total)
1 2 3 … 261 262 263 … 1,701 1,702 1,703
  • Author
    Posts
  • September 13, 2014 at 6:06 pm in reply to: Time to replace drain pump? #419211
    Martin
    Participant

    Re: Time to replace drain pump?

    It’s a permanent magnet pump so the impeller will not spin freely anyway. Don’t assume the pump at fault as it may be something blocking the tub sump hose? The drain coupling under the sink if fitted that way? Kink in drain hose?

    September 13, 2014 at 3:56 pm in reply to: ISE Ci555 leaky #419056
    Martin
    Participant

    Re: ISE Ci555 leaky

    Tub out in the garden then fire up the jet washer! Result :tup:

    September 13, 2014 at 2:24 pm in reply to: Whirlpool 10kg new drum paddles wont fit #419155
    Martin
    Participant

    Re: Whirlpool 10kg new drum paddles wont fit

    Oh dear, could be up the creek here then? 😉

    September 13, 2014 at 2:21 pm in reply to: Bosch sbv50e1.10gb17 fault #419206
    Martin
    Participant

    Re: Bosch sbv50e1.10gb17 fault

    Oh what? There’s always a “small amount if water” left in the sump. 🙁

    September 13, 2014 at 11:41 am in reply to: Electrolux ESL43010 not heating water #419207
    Martin
    Participant

    Re: Electrolux ESL43010 not heating water

    The only way to answer that would be to test the element first. Guessing can turn out a to be a costly mistake.

    September 13, 2014 at 10:51 am in reply to: Bosch sbv50e1.10gb17 fault #419204
    Martin
    Participant

    Re: Bosch sbv50e1.10gb17 fault

    Circulating pump leak? Inlet matrix? Tub gasket?…..find that leak. 😀

    September 13, 2014 at 7:48 am in reply to: Sharp SJGC 680VBK #418946
    Martin
    Participant

    Re: Sharp SJGC 680VBK

    monkeygrinder wrote:Should I assume then that no one has any knowledge of this appliance?

    It appears not and also no-one stocks them in the UK at present it seems. 🙁

    September 13, 2014 at 6:37 am in reply to: Bosch sbv50e1.10gb17 fault #419201
    Martin
    Participant

    Re: Bosch sbv50e1.10gb17 fault

    Check the filter on the water supply valve attached to the stop tap. It may be silted up?

    September 12, 2014 at 3:46 pm in reply to: new washing mashine #419164
    Martin
    Participant

    Re: new washing mashine

    Budget = Beko

    September 12, 2014 at 1:31 pm in reply to: haier HW-C1460TVEU continout ballancing #419151
    Martin
    Participant

    haier HW-C1460TVEU continout ballancing

    Quote for 4 just in case the other 3 don’t work. 😉 :clown:

    September 12, 2014 at 1:06 pm in reply to: SMEG OVEN #419160
    Martin
    Participant

    Re: SMEG OVEN

    Turn your caps lock off for starters.

    When the element blew it may have fused the selector switch? The thermal trip could be O/C? Or you may have wired it up incorrectly? That’s should cover all possibilities I would think. 😀

    September 12, 2014 at 1:01 pm in reply to: Beko Oven needs EXACT time ?!? #419035
    Martin
    Participant

    Re: Beko Oven needs EXACT time ?!?

    I’ve heard of ‘Chico Time’ but never ‘Beko Time’….!

    September 11, 2014 at 9:12 pm in reply to: Siemens wt36v398 #419090
    Martin
    Participant

    Re: Siemens wt36v398

    timdowning wrote:Martin it does have the front ntc, item 0216. Is this the one you were referring to originally?

    Yeah that’s the one, well spotted 😀

    September 11, 2014 at 7:39 pm in reply to: Bosch was24466gb05 f67 #419127
    Martin
    Participant

    Re: Bosch was24466gb05 f67

    German web sites say it is a board fault (coding issue apparently)….?

    September 11, 2014 at 7:09 pm in reply to: smeg dishwasher help #419126
    Martin
    Participant

    Re: smeg dishwasher help

    …….and post in Trade Tech forum…..

  • Author
    Posts
Viewing 15 posts - 3,916 through 3,930 (of 25,534 total)
1 2 3 … 261 262 263 … 1,701 1,702 1,703