[Martin]

Re: Dishwasher required with minimum depth

Electrolux do one at 515 deep.

[Martin]

Re: Reviving towels that have had fabric softener use consis

Try this WikiHow tip.

[Martin]

Re: Football Season 2014/2015

After the 4 – 0 drubbing last night ‘Dutch courage’ is somewhat lacking. Now the fans are going to pay dearly as ManU are going to throw more money at the problem. 🙁

[Martin]

Re: Gas Safe & Proud

kwatt wrote:It’s legal.

Are you sure about that? That compromising and preventing the safe access to other electrical domestic appliances is legal?

[Martin]

Re: Zanussi Washing Machine motor

“Motor a bit noisy” may be the clue here. 😉

[Martin]

Re: DEFROSTED FRIDGE FREEZER THEN VERY STRANGE THINGS HAPPEN

Chris Cross X Bosch?

[Martin]

Re: Hoover WMH139D/1-80

Always but always use the Megger on every job. It finds faults the eyes cannot see. 😉

[Martin]

Re: Bosch Exxcel 1400 (WF02865UK) Bearing kit

HERE you go! 😀

[Martin]

Re: Hoover WMH139D/1-80

Heater earth leak?

[Martin]

Re: AEG washing machine making funny noise when in rinse / d

Closer look at the pump then your next move. Probably got a lot of lateral movement on the impeller.

[Martin]

Re: Siemens WT46E389gb/17 Dryer

You’ve gotta hope it’s just the front NTC because the PCB is the wrong side of 250 quid….!?!!!

[Martin]

Re: zan code

E62 = Power relay on heater unit faulty. Replace relay on the PCB or the PCB itself.

[Martin]

Re: AEG washing machine making funny noise when in rinse / d

Clapped out pump or something inside the pump rattling around. Have you actually checked the filter chamber to see if there’s something stuck inside?

[Martin]

Re: Hoover HFI 3015 not finishing cycle

Pour a large bowl of scalding hot water into the tub. Leave for a couple of mins then switch it to pump out. Alternatively, check the impellor for lateral movement (Worn bearings )

[Martin]

Re: Samsung WF219ANW/XAA tE error message

From what I’ve read a broken thermistor wire could be the problem?

[Author]

Posts