Martin

Forum Replies Created

Viewing 15 posts - 1,036 through 1,050 (of 25,534 total)
1 2 3 … 69 70 71 … 1,701 1,702 1,703
  • Author
    Posts
  • February 4, 2017 at 2:17 pm in reply to: Electrolux oven won’t switch off #445023
    Martin
    Participant

    Re: Electrolux oven won’t switch off

    With that model the main Power Board is the likely suspect. A relay stuck by the sound of it. 🙁

    February 4, 2017 at 1:19 pm in reply to: Electrolux oven won’t switch off #445021
    Martin
    Participant

    Re: Electrolux oven won’t switch off

    Don’t do guesswork, need the model number.

    February 4, 2017 at 10:55 am in reply to: Bosch washer fault–Flashing lights and bleeping #445017
    Martin
    Participant

    Re: Bosch washer fault–Flashing lights and bleeping

    TBH I’m not exactly sure but it may well be that the motor brushes need replacing? That involves pulling the machine out sadly. Not an easy task with these built in machines. 🙁

    February 4, 2017 at 9:01 am in reply to: Bosch spinning too fast? #439927
    Martin
    Participant

    Re: Bosch spinning too fast?

    Could you please detail again the exact symptoms?

    February 3, 2017 at 3:56 pm in reply to: Bosch no fault codes displayed #444995
    Martin
    Participant

    Re: Bosch no fault codes displayed

    robti wrote:WAE28464GB/03 FD 8603 600102
    Sorry I just wondered why no codes showed

    If should have given an F:21 error code so, perhaps it needs more than just new brushes? The only way you’ll get the answer to that is when you change the brushes and it won’t work without carry out the ‘reset’ procedure.

    February 3, 2017 at 3:36 pm in reply to: Hotpoint Whirlpool AWZ512SE #444999
    Martin
    Participant

    Re: Hotpoint Whirlpool AWZ512SE

    There’s a whole raft of drain filters and gaskets on ‘another’ website. Just Google AWZ512 Drain Filter. The one you need is £11 😉

    February 3, 2017 at 12:11 pm in reply to: bosch washer #444910
    Martin
    Participant

    Re: bosch washer

    Still no model number then Dop? It would help. 😕

    February 2, 2017 at 8:43 pm in reply to: Bosch no fault codes displayed #444993
    Martin
    Participant

    Re: Bosch no fault codes displayed

    You second thread on the same subject concludes that the carbons need replacing. As far as error codes are concerned though, many models of Bosch (even 10 year old vintage) do give error code indications. What you didn’t tell us was the all important model number (ENr number) shown inside the door and on the back panel.

    February 2, 2017 at 8:38 pm in reply to: Random magnet found in Siemens washer. #444978
    Martin
    Participant

    Re: Random magnet found in Siemens washer.

    The magnet does not come from any component in your machine. It must have been there some time and left by someone that had previous reason to access the internal workings for whatever reason. 😕

    February 2, 2017 at 5:26 pm in reply to: Bosch SMS series DW – #444985
    Martin
    Participant

    Re: Bosch SMS series DW –

    The complete unit

    February 2, 2017 at 10:09 am in reply to: Aqualtis Auto dose issue #444967
    Martin
    Participant

    Re: Aqualtis Auto dose issue

    A spam overdose. Good spot Don :tup:

    February 1, 2017 at 4:03 pm in reply to: My washing machine fills with water after cycle finishes #444962
    Martin
    Participant

    Re: My washing machine fills with water after cycle finishes

    …..the water inlet solenoid valve needs replacing.

    January 31, 2017 at 2:14 pm in reply to: Neff S51E50X1GB/25 heater insulation fault. #444832
    Martin
    Participant

    Re: Neff S51E50X1GB/25 heater insulation fault.

    clivejameson wrote:I think you just order a new sump…comes with a new seal…

    Sump is 00702508 and you’ll also need the cover 00652523

    Costly fix so be sure first that that’s where it’s leaking I would. 😉

    January 31, 2017 at 12:57 pm in reply to: Neff Oven B46C74N0GB/35 #444912
    Martin
    Participant

    Re: Neff Oven B46C74N0GB/35

    Sorry I can’t help but our UKW colleague George (aka Allsorts) can. See link below……
    http://www.justanswer.co.uk/appliance/8 … 2-3gb.html

    January 30, 2017 at 10:29 am in reply to: bosch washer #444904
    Martin
    Participant

    Re: bosch washer

    You didn’t give us that all important ENr number. Many Bosch machines only do a short spin (800rpm) on ‘spin only’ cycle.

  • Author
    Posts
Viewing 15 posts - 1,036 through 1,050 (of 25,534 total)
1 2 3 … 69 70 71 … 1,701 1,702 1,703