Muv

Forum Replies Created

Viewing 15 posts - 346 through 360 (of 647 total)
1 2 3 … 23 24 25 … 42 43 44
  • Author
    Posts
  • February 1, 2013 at 2:18 pm in reply to: Whirlpool AWOD 5762 drum paddles #389211
    Muv
    Participant

    Re: Whirlpool AWOD 5762 drum paddles

    Ok, thanks for your help anyway Don

    Martin

    January 31, 2013 at 7:11 pm in reply to: Hotpoint WMA56 #389185
    Muv
    Participant

    Re: Hotpoint WMA56

    Thanks very much

    Martin

    January 31, 2013 at 6:22 pm in reply to: Beko WM5100 No spin #389172
    Muv
    Participant

    Re: Beko WM5100 No spin

    Yes washes fine , just no spin..customer didnt have enough clothes for me to try a full load..
    Cleaned the comm up, but still the same

    Have heard that these machines wont spin at all if empty?
    And also As mentioned in my first posting, it spins during a self test, no problems

    Martin

    January 30, 2013 at 7:22 pm in reply to: miele W562 stops excess detergent light flashig #389113
    Muv
    Participant

    Re: miele W562 stops excess detergent light flashig

    According to the user manual, its bot a fault as such..customer is just using to much detergent!

    Martin

    January 28, 2013 at 7:26 pm in reply to: Creda Cooker Model 48364 #388869
    Muv
    Participant

    Re: Creda Cooker Model 48364

    Fan ok?

    January 28, 2013 at 7:24 pm in reply to: hotpoint aquaries wma54 #388855
    Muv
    Participant

    Re: hotpoint aquaries wma54

    Check your water inlet hoses for any kinks, also check inlet valves filter..that may be clogged up

    Martin

    January 28, 2013 at 7:16 pm in reply to: Creda Cooker Model 48364 #388867
    Muv
    Participant

    Re: Creda Cooker Model 48364

    Door seals ok?

    January 23, 2013 at 9:00 am in reply to: miele w526 #388534
    Muv
    Participant

    Re: miele w526

    Just checked ..its fitted with the EDPL122 board… Sorry dont repair those…yet!

    Martin

    January 23, 2013 at 8:27 am in reply to: miele w526 #388533
    Muv
    Participant

    Re: miele w526

    As long as its fitted with the EL200 board of course!

    January 23, 2013 at 8:25 am in reply to: miele w526 #388532
    Muv
    Participant

    Re: miele w526

    If its not the brushes… Its board out time and replace a few components..ive done around 10 of them in the last 2 months…

    If you want you can send me the board?

    Martin

    January 21, 2013 at 1:52 pm in reply to: awo/d4506 #388390
    Muv
    Participant

    Re: awo/d4506

    Interlock checking time then!

    Martin

    January 21, 2013 at 1:50 pm in reply to: retail appliance sales invoice software #387381
    Muv
    Participant

    Re: retail appliance sales invoice software

    I use “invoice2go” on the IPad…pretty good..but may be a bit basic for your needs, but worth a look ..its probably available for a PC as well

    Martin

    January 21, 2013 at 1:34 pm in reply to: hotpoint wmfp843g #388385
    Muv
    Participant

    Re: hotpoint wmfp843g

    Silly question.. But have you checked the water valvve? Have had few the last dew days with ice formed around the plastic filter insert!

    Martin

    January 17, 2013 at 1:54 pm in reply to: Bosch washing machine poor spin #388120
    Muv
    Participant

    Re: Bosch washing machine poor spin

    Tacho could be worth checking also

    Martin

    January 16, 2013 at 1:56 pm in reply to: Diplomat oven 48series faulty temperature #388028
    Muv
    Participant

    Re: Diplomat oven 48series faulty temperature

    Sounds like a thermostat problem, but also worth checking the door seals for wear…especially if you have hot air leaking out…

    Martin

  • Author
    Posts
Viewing 15 posts - 346 through 360 (of 647 total)
1 2 3 … 23 24 25 … 42 43 44