Forum Replies Created
-
Posts
-
Re: Neff EF688/04 Built in coffee machine
Thats what i thought. Cust had no more details but i’ll prob. find another number when i go this afty.
But as usual cust says “thats the ooooooooooonnly on the appliance and they’ve looked everywhere” (with eyes closed!)
Watch this space!
Nige
Re: connells estate agents nightmare!
Three repairers are having trouble getting paid in my area at the moment one from october!
Thankfully i’m not one as since being bitten like this too many times they have to pay the call-out up front then parts on the job. (needless to say some don’t want to work like this but look what happens so we don’t miss it)
Same old excuses. “The landlord wont pay so we cant do anything”, “there isn’t enough money in the rent account” blah blah.
It seems they are so used to being “agents” that if landlord wont pay it’s hard luck for you. Even though your contract is with the agent.
Nige
Re: unpaid
Call the customer and say the suppliers have issued a recall on a batch of badly manufactured belts and you will call and replace it free a charge.
Then go and strip the dyer and leave it like that go to your van and drive away.
Or if he brings the belt in you can hold back the “replacement” it in lieu of payment for work carried out.
Nige
Re: Hotpoint SDW 60
I know it sounds daft but is it connected under the sink and if so that fitting my be blanked off?
Lights 4-5 is a time out fill error
Nige
Re: Washing Machine Tripping Electrics
Start at the heater. Test if insulation reading is poor and if so replace.
Nige
Re: ISE5 V2
Child lock! The times i’ve fallen for those! Adult lock more like. Teach me to not look in the tech stuff eh. I’ll just skulk off and be rubbish some more 😳
Mind you i’m stumped by some customers baby gates!
Re: ISE5 V2
Ok so went back to look at this and after much (very) random button pressing.
Keeping a finger on start button it displays the 0:-n then after a few seconds flashes twice at which point if you turn it to off it then clears.
But had to do this a few times so i the guess time you take to do it is critical.
It goes like this if you try and select a program after the last program has finished if you don’t turn it back to off first. I refitted the old pcb and reset it so i’ll send the new one back as not needed.
Turns out the guy had lost his wife recently and she did all the washing. He thought when a program was done and it says END that if he wanted to run the program again he just pressed start. This is when it then displays 0:-n .
Clear as mud?
Nige
Re: ISE5 V2
I’ll have another play but as always with a job like this it’s a million billion miles away too and the customer is to stupid to help over the phone with button pressing and resetting! You know the type! “Which ones the start button” “It just says end” blah blah lolz
Nige
Re: Stand Well Clear
Most students use them until they look like that instead of ringing the landlord to say it’s a bit noisy when the bearings go!
Re: BEKO WM5100W fault codes?
Hi yes it’s separate part but at first glance does look boardy lol (I ordered a board for that one in my straw clutching at stage!)
Re: BEKO WM5100W fault codes?
I had one like this and it was the little program selector. nearly commited suicide trying to find the fault though then “Criscold” on here sent me some gumph but i’m cant find the email to forward to you with the codes. But he might be able to get you the info you need.
Nige
Re: Efficiency Rating
We’ve been told in the past to put the energy ratings on but never done it. Just said i will when the charity shops / ebay etc do as well.
Nige
