nigegt

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 420 total)
  • Author
    Posts
  • in reply to: Fisher & Paykel DD603 #395638
    nigegt
    Participant

    Re: Fisher & Paykel DD603

    Brill thanks John! Corroded plug connector contacts cleaned up and runs a treat (Every day is a school day!)

    Nige

    in reply to: Smeg DWF44SS1 Dishwasher Installation Problem, #394787
    nigegt
    Participant

    Re: Smeg DWF44SS1 Dishwasher Installation Problem,

    Hi

    The inlet hose on this model has an aquastop valve built in to the tap end. You will have to buy a new hose but be ready for the price when you shop around. £100ish!

    Nige

    in reply to: Beko WM5140W Washing machine. Spins & stops #394861
    nigegt
    Participant

    Re: Beko WM5140W Washing machine. Spins & stops

    Unclip the tacho cover and see if the magnet is broken/cracked. If not look towards p.c.b. fault.

    Nige

    in reply to: Indesit FD20 Built-In Double Oven #394804
    nigegt
    Participant

    Re: Indesit FD20 Built-In Double Oven

    Sounds like the base element in the top oven has failed so i would look there first.

    Nige

    in reply to: Hygena APL8224/1. Programmer not moving on #388945
    nigegt
    Participant

    Re: Hygena APL8224/1. Programmer not moving on

    Check for a circuit through the timer motor. It sounds like thats your problem. If it’s o/c then order new timer

    in reply to: Diplomat integrated dishwasher completely dead #388957
    nigegt
    Participant

    Re: Diplomat integrated dishwasher completely dead

    On/off switch is a common fail on the Beko made diplomat d/ws so your most likely on the right track

    in reply to: Indesit idc75 no heat #388137
    nigegt
    Participant

    Re: Indesit idc75 no heat

    Hi, Yes there is another one at the front of the drum at the top (usually covered in fluff so you cant see it!)

    Nige

    in reply to: advice required #387279
    nigegt
    Participant

    Re: advice required

    I just slipped and hurt my knee while reading your post and the replies on my phone while walking to my van so do i sue you all individually or just Whitegoods as a whole?

    in reply to: howden hja 8703 programs not working #387687
    nigegt
    Participant

    Re: howden hja 8703 programs not working

    Sounds like a faulty program selector. Cheap as chips and easy to replace.

    Nige

    in reply to: Correct silicone for fitting hob in natural stone worktop ? #385584
    nigegt
    Participant

    Re: Correct silicone for fitting hob in natural stone workto

    So you can use self adhiesive seal on the ones which are rebated in to the granite when you refit after service?

    in reply to: Hands Up… #384968
    nigegt
    Participant

    Re: Hands Up…

    I use Adwords express? It narrows the search area to your locality anyway and uses the relevence of your google+ page so any review stars show up in your add so most times when there running it goes straight to the top.

    I don’t pretend to know how it works though as i’m a net spanner but i’ve been really suprised what a diffrence it makes to the phones and email and increase in jobs.

    Nige

    in reply to: Christms Lights #385059
    nigegt
    Participant

    Re: Christms Lights

    It’s started in Hull too. All the snowy windows and “Santa stop here” bollards!

    Funny how it’s in the nicest areas though. Bransholme, Orchard Park etc. 😀

    in reply to: dv06 dryer #384155
    nigegt
    Participant

    Re: dv06 dryer

    Does the filter open out on this model? I had a CD60w that wasn’t drying well or condensing. The customer had only ever wiped fluff off the outside of the filter.(Didn’t know it clipped open) When opened up the filter wasn’t full of fluff but the gauze was just choked and after a wash with a stiff scrubber all was well again. (It took 3 years to get like this mind!)

    Nige

    in reply to: LG TD-C70040E Keeps tripping breaker #382537
    nigegt
    Participant

    Re: LG TD-C70040E Keeps tripping breaker

    Hi

    Just one pump. Sits behind the motor. If it’s running it may just be fluff in the chamber the pump sits in.

    Remove the motor to get to it is easyest way.

    Nige

    in reply to: LG TD-C70040E Keeps tripping breaker #382535
    nigegt
    Participant

    Re: LG TD-C70040E Keeps tripping breaker

    Hi

    Water building up in rear panel means the dryer is not condensing properly or not taking the water away.

    Check that the condenser unit and airways are squeeky clean and that the pump is working it’s best and not blocked/faulty.

    Nigel

Viewing 15 posts - 106 through 120 (of 420 total)