robbra

Forum Replies Created

Viewing 15 posts - 541 through 555 (of 1,090 total)
1 2 3 … 36 37 38 … 71 72 73
  • Author
    Posts
  • January 30, 2010 at 9:03 am in reply to: Samsung wm #308713
    robbra
    Participant

    Re: Samsung wm

    Could be one of those stretchy belt gone a bit loose as any jerky rotation on the distribute would stop it spinning with a load. Servis suffered greatly with this problem. Check the tension.
    Rob

    January 29, 2010 at 2:59 pm in reply to: JTM again! #309918
    robbra
    Participant

    Re: JTM again!

    Never been told they have web closing.
    Perhaps they should tell us all.

    January 28, 2010 at 7:52 pm in reply to: Samsung P1497 Have You Had This Fault…. #310410
    robbra
    Participant

    Re: Samsung P1497 Have You Had This Fault….

    Either out of balance load or it thinks it hasn’t emptied. Needs to be tried empty to verify but most likely OOB
    Rob

    January 28, 2010 at 7:53 am in reply to: hotpoint wma52 motor #265097
    robbra
    Participant

    Re: hotpoint wma52 motor

    Thanks Jim,
    You are well up on Hotpoints.
    Will get it and take it apart.
    Rob

    January 28, 2010 at 7:40 am in reply to: Cheap Siemens – We’re Not Responsible…. #310303
    robbra
    Participant

    Re: Cheap Siemens – We’re Not Responsible….

    Even less
    269 Euro
    Do you price match Goatboy ’cause if so I’ll have 5 😉

    January 27, 2010 at 3:47 pm in reply to: Cheap Siemens – We’re Not Responsible…. #310292
    robbra
    Participant

    Re: Cheap Siemens – We’re Not Responsible….

    But i have to say that certain forums that i’m a member on this would be total BANNAGE for the poster 8)

    Thing is……..He is the boss 😉

    January 27, 2010 at 3:41 pm in reply to: Cheap Siemens – We’re Not Responsible…. #310289
    robbra
    Participant

    Re: Cheap Siemens – We’re Not Responsible….

    mmmmmmmmmmm 😳

    January 27, 2010 at 11:20 am in reply to: hotpoint wma52 motor #265095
    robbra
    Participant

    Re: hotpoint wma52 motor

    Thanks Jim, much obliged,
    It’s the field coil that is o/c. Customer tried to fit his own brushes and blew it up, he said there was a big flash and he was left in darkness. Should have rung me in the first place.
    Thanks again to all who replied.
    Rob
    PS armature at spares on here are cheaper 😉

    January 27, 2010 at 9:49 am in reply to: hotpoint wma52 motor #265093
    robbra
    Participant

    Re: hotpoint wma52 motor

    Yep,
    Just noted the heading 😳
    All I need to know is will this motor work, is it worth a shot?
    And now I know what a hybrid timer and the difference in analogue and digital.
    Thanks

    January 27, 2010 at 8:22 am in reply to: hotpoint wma52 motor #265090
    robbra
    Participant

    Re: hotpoint wma52 motor

    Thanks but I’m a bit confused now.
    What’s a hybrid timer? This one has a combined timer module.
    This is a WM52 not WMA.
    The motor taken off is a 6 pin,4+2 and a small tacho.
    The motor he wants me to fit is a 7 pin with black brushes and a small bolt through the tacho.
    Thanks

    January 26, 2010 at 6:17 pm in reply to: hotpoint wma52 motor #265086
    robbra
    Participant

    Re: hotpoint wma52 motor

    Anyone any info?
    And what is digital/analogue?
    Thanks
    Rob

    January 25, 2010 at 9:50 am in reply to: hotpoint wma52 motor #265085
    robbra
    Participant

    Re: hotpoint wma52 motor

    Hi,
    hijacking this old thread.
    Same model and customer wants me to fit a FHP motor with an orange sticker and code 160201702. I have heard that some are for digital and some analogue,does this refer to timer as opposed to control panel lcd?
    Will this one work?
    Thanks
    Rob

    January 23, 2010 at 10:54 pm in reply to: Comark 1602 Electronic Thermometer #309759
    robbra
    Participant

    Re: Comark 1602 Electronic Thermometer

    Yes, thought you would have but was just a thought.
    Cheers

    January 23, 2010 at 9:05 am in reply to: CRB checks #309764
    robbra
    Participant

    Re: CRB checks

    Agree with Lee on this one for a change 😉

    Well it had to happen one day……….. 😆

    January 23, 2010 at 9:03 am in reply to: Comark 1602 Electronic Thermometer #309757
    robbra
    Participant

    Re: Comark 1602 Electronic Thermometer

    Comark have their own website and support so they may be able to help.
    Rob

  • Author
    Posts
Viewing 15 posts - 541 through 555 (of 1,090 total)
1 2 3 … 36 37 38 … 71 72 73