robbra

Forum Replies Created

Viewing 15 posts - 556 through 570 (of 1,090 total)
1 2 3 … 37 38 39 … 71 72 73
  • Author
    Posts
  • January 22, 2010 at 4:28 pm in reply to: Recycled drain pumps #309624
    robbra
    Participant

    Re: Recycled drain pumps

    And it’s dearer than the new ones on there :rolls:

    January 20, 2010 at 9:30 pm in reply to: Baumatic.BWR1206 Who makes it? #309342
    robbra
    Participant

    Re: Baumatic.BWR1206 Who makes it?

    Yes Lee,m
    me too but I can’t recommend to a local villager but it’s up to her if she ignores me.
    Rob

    January 20, 2010 at 3:02 pm in reply to: The 0800 Thread #300998
    robbra
    Participant

    Re: 0800 Repair

    A bit strong there Lee.
    Why not trust the man? It’s not my idea of a bargain but to each his own and if he makes a go of it good for him.
    Rob

    January 20, 2010 at 2:54 pm in reply to: Baumatic.BWR1206 Who makes it? #309340
    robbra
    Participant

    Re: Baumatic.BWR1206 Who makes it?

    I work on Haier for Argos and wouldn’t recommend one if it cost a tenner.
    Must be another clone as the soap dispenser is similar to Ariston.

    January 19, 2010 at 4:49 pm in reply to: Philips became Crosslee #309274
    robbra
    Participant

    Re: Philips became Crosslee

    Thanks Ken,
    Didn’t see that on their site.
    Still, a great little dryer
    Rob

    January 19, 2010 at 4:26 pm in reply to: Samsung wm #308707
    robbra
    Participant

    Re: Samsung wm

    Normally means the machine thinks it hasn’t emptied. Have you checked the pressure pot and switch?
    Rob

    January 17, 2010 at 11:04 pm in reply to: Another joke. #137490
    robbra
    Participant

    Re: Another joke.

    How do you turn a dishwasher into a snow plough?
    Give her a shovel. da da

    January 14, 2010 at 2:51 pm in reply to: Hose clip pliers #225031
    robbra
    Participant

    Re: Hose clip pliers

    Thanks Mark,
    I was thinking if the old ones could be used but maybe it’s a bit risky.
    Rob

    January 14, 2010 at 8:57 am in reply to: Hose clip pliers #225029
    robbra
    Participant

    Re: Hose clip pliers

    I know this is an old thread but has anyone used the pliers? I am tempted but I’m not sure if the originally fitted clips are up to another clamping. I have just done a Hotpoint D/W heater but jubilee clips are either a tight fit or way too large. There is a tread on thin clips but if these pliers are good then it would be a good addition to my kit.
    Rob

    January 12, 2010 at 6:05 pm in reply to: Hotpoint WMD960P very noisy. #308520
    robbra
    Participant

    Re: Hotpoint WMD960P very noisy.

    HotDog wrote:sounds like restraint bolts still in

    I think Steve would have noticed that 😛

    January 12, 2010 at 9:57 am in reply to: sevis m6766w queer fault during cycle #308214
    robbra
    Participant

    Re: sevis m6766w queer fault during cycle

    I had very similar on a Hoover washer, stuttering valve and found if I put plug in a different socket it disappeared. Probably the module but just a suggestion
    Rob

    January 9, 2010 at 7:51 am in reply to: Snow…. #307879
    robbra
    Participant

    Re: Snow….

    The clearest bit is around Dorchester and Weymouth so no problems whatsoever here apart from needing a new battery and heat plugs 👿

    January 8, 2010 at 8:23 am in reply to: Hose Kit 651053529 #308174
    robbra
    Participant

    Re: Hose Kit 651053529

    Has this customer had a previous problem previously?
    Servis had a bad problem with the cold pressure backing up hot tanks and flooding around 10 years ago and went to double hoses but I never knew them to fit a non return valve in the hot valve.What is in the kit and how many inlets?
    I can’t find a picture of this kit but on the old Servis I either converted to 2 hoses or made it cold fill by blanking off the hot valve.
    Rob

    January 7, 2010 at 3:12 pm in reply to: snowed in !!! #307981
    robbra
    Participant

    Re: snowed in !!!

    Hope you told him we were pretty good at chasing invaders out of his country in 1945.

    Alex

    Priceless 😆 😀 😮

    December 30, 2009 at 8:05 am in reply to: Motor Pulley Washing machine #307380
    robbra
    Participant

    Re: Motor Pulley Washing machine

    I tried on a Servis induction motor just the once and it wouldn’t budge.
    If yours is that hard to get off could you get it back on again?
    Rob

  • Author
    Posts
Viewing 15 posts - 556 through 570 (of 1,090 total)
1 2 3 … 37 38 39 … 71 72 73