senseib

Forum Replies Created

Viewing 15 posts - 136 through 150 (of 252 total)
1 2 3 … 9 10 11 … 15 16 17
  • Author
    Posts
  • September 12, 2007 at 9:14 pm in reply to: beko wma61 #227442
    senseib
    Participant

    Re: beko wma61

    Just tapped wma61 model number into Beko Geniune spares site, http://www.4Beko.co.uk – no such model on that site!

    Brian.

    September 12, 2007 at 6:16 pm in reply to: electrolux ESL6225 D/W #227380
    senseib
    Participant

    Re: electrolux ESL6225 D/W

    Most likely suspect PCB then… 😈

    Brian.

    September 12, 2007 at 5:02 pm in reply to: zanussi zwx1506w #227362
    senseib
    Participant

    Re: zanussi zwx1506w

    Check the edge connector on the facia board at the front of the machine, the thin connector strip often gives problems – try disconnecting gently squeeze connections together & then reconnect.

    Could solve the problem 🙂

    Brian.

    September 12, 2007 at 4:09 pm in reply to: hotpoint d/w software error #227391
    senseib
    Participant

    Re: hotpoint d/w software error

    Have you checked for dry joints on the board? – signs of burning etc.

    Brian.

    September 12, 2007 at 4:06 pm in reply to: electrolux ESL6225 D/W #227378
    senseib
    Participant

    Re: electrolux ESL6225 D/W

    Is the heater element chamber ok? – They go open circuit, common fault! (Part number: 50280071007)

    Brian.

    September 10, 2007 at 8:02 pm in reply to: neff/bosch motor end frame #227187
    senseib
    Participant

    Re: neff/bosch motor end frame

    Qualtex lists alternative part numbers for 092025 as:- 096331, 42B508, 496872 & 844296 – all priced same as original.
    Brian.

    September 10, 2007 at 4:37 pm in reply to: neff/bosch motor end frame #227183
    senseib
    Participant

    Re: neff/bosch motor end frame

    Hi Abbots,

    Part number 092025 – (motor end frame 6 pin) correct part for that model according to BSH – is available at Qualtex (stock code 016863) £24.38+vat.

    Hope this helps,
    Brian.

    September 9, 2007 at 10:41 pm in reply to: zanussi problem #227120
    senseib
    Participant

    Re: zanussi problem

    Was the module new – did it come configured?

    According to my TDS disc the configured module for that model is: 973914225203-04/6

    September 8, 2007 at 6:07 pm in reply to: Confusion Over Drum Shaft for H/point WMA58 – Which One! #227000
    senseib
    Participant

    Re: Confusion Over Drum Shaft for H/point WMA58 – Which One!

    YEP! WMA 30mm spider:- 1604477 definately in stock at Qualtex – their stock code is:- 253194

    Telephone no:- 01795 592570

    Says on my system that they’ve got 99 days supply – I assume that means they’ve got 99 units in stock! 😉

    Brian.

    September 8, 2007 at 2:49 pm in reply to: Confusion Over Drum Shaft for H/point WMA58 – Which One! #226998
    senseib
    Participant

    Re: Confusion Over Drum Shaft for H/point WMA58 – Which One!

    Part number:- 1604477 in stock at Qualtex £17.78+vat 😀
    Also lists 1604290 £18.99+vat in stock.
    Brian.

    September 8, 2007 at 12:14 am in reply to: Dumped #226960
    senseib
    Participant

    Re: Dumped

    Where will reality tv stoop to next? – “How long you can live in sewer without coming up smelling of s**t” perhaps 😈

    Give it time 😡 remember you heard it here first : 😆
    Brian.

    September 7, 2007 at 11:51 pm in reply to: Bosch d/w SGI43E02GB/08 #226610
    senseib
    Participant

    Re: Bosch d/w SGI43E02GB/08

    No more than 30{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} – 4.4 see i did read the bumf!

    You were absolutely right it was the flow meter guys – big PAT on the back to all those who got it right 8)

    Brian.

    September 7, 2007 at 8:51 pm in reply to: white-Westinghouse cooker stat #226939
    senseib
    Participant

    Re: white-Westinghouse cooker stat

    Thanks dave..
    Brian.

    September 7, 2007 at 12:50 pm in reply to: indesit pt/no #226945
    senseib
    Participant

    Re: indesit pt/no

    Detergent draw part number C00031870. Dont know if it comes with front attached or not – Low stock at Masterpart £7.19+vat.

    Hope this helps,
    Brian.

    September 5, 2007 at 6:15 pm in reply to: Septic Tank systems #226726
    senseib
    Participant

    Re: Septic Tank systems

    Martin wrote:Not a lot of people know this…


    The MARTIN Caine of the washer world 😆

  • Author
    Posts
Viewing 15 posts - 136 through 150 (of 252 total)
1 2 3 … 9 10 11 … 15 16 17