Forum Replies Created
-
Posts
-
Re: Prima LPR926 oven clock
Forget that. Clock was dead caused by push button toc on rear of lower main oven :lesson: Cooling fan cut in stat i presume.
S.
Re: samsung rs21dcsv
The heater must be removed from the new evaporator and transferred to the old one. a tricky repair with sharp edges. Power off if you are going to have a go yourself. Can i suggest the Repairs@ service if you do not feel confident.
http://www.ukwhitegoods.co.uk/modules.p … odsRepairsRegards
SimonRe: Belling IDW604 dishwasher leak.
Check the seal where the top basket spray arm feed goes into rear of dishwasher. Had one perished and it sprayed downwards under door.
S.
Re: Original Servis Quartz any out there
I repair a quartz every 2 years on my patch. Pressure vessel blocked 😀
S.
Re: New way to replace Bosch brushes.
I agree. UKW saved my business a few years ago. Now some of my competition recommend me for certain jobs. Ironic.
S.
Re: Bosch SGS43CO2GB/35 no lights – dead
May be module. Please do not test live. Unplug power and check for live /neutral using ohms scale on multimeter.
S.
Re: NEFF Double Oven Problem !
If you see the Repairs@ link on the left of the page someone will be able to advise you of cost. TimeClock on front panel will default to auto on power failure.
S.
Re: NEFF Double Oven Problem !
Sounds like Element failure and clock has to be set as well. Post ENR no on plate if you open lower door.
S.
Re: Whirlpool adg7540 dishwasher cold water only
Correction, pump available from whirlpool. a couple of hundred quid 8O.
Decided not to go ahead with repair. I dont blame him. Many thanks Mr Finn for letting me have a look. I had fun getting the dishwasher out that had been screwed to the cupboard sides then siliconed in then a granite worktop put over the top of it all 😆S.
Re: Lg WM1236FD Child lock on
Ta Lawrence. Customer must have googled it as she rang back its working now 😆
S.
Re: hotpoint bwm12
Sounds like you have to find the object between inner and outer drum.
Unplug power if you are going in.S.
Re: Refrigeration ‘interim personnel certificate’
If you just replace PCBs/thermostats is it still required?
S.
