Forum Replies Created
-
Posts
-
Re: ctd00
channel to pump chamber blocked flooding reservoir in bottom and blowing water onto elements usually, but take a pump just in case
Re: KGN33V00GB/01
pcb=644127
aluminium plate=679167
heater=642980 Only with FD 8604 to 8612 and if the KI is not 99.
all must be replaced together hope this helpssmartin
Re: Bosch SGS4332GB/17 Upper Spray Arm
the mounting from memory clips on at front end and back at the same time, take your time and work out logically where it would clip into and it will make sense, sorry cant be any more help as has been a while since i last fitted one
Re: Yet another gripe at connect.
my apologies 😳 didnt see her post at the bottom of the previous page.
Re: Yet another gripe at connect.
i dont think any of us on here have a problem with fitting pattern parts its the being charged genuine part prices for pattern parts which i think is the issue
smartinRe: Yet another gripe at connect.
like i said in another post had this with the bosch horseshoe elements, dont know about illegal but it certainly aint moral
Re: Hotpoint FF200E – fridge keeps warming up
imho most problems with these are down to people not using them correctly, ie putting loads of fresh food in freezer without putting it on super freeze before hand.
Re: ASKO 20004 – Please help with unknown error
does the drum turn on wash ? if it doesnt turn at all i would say that its more than likely a wiring problem.
Re: Beko TLA 6018 not evaporating drip tray.
have had a few of these with bowed doorsand some other makes aswell, i think it happens when they are foamed at the factory, a new door will almost certainly do the trick as there should be no gaps at all,gap = warm air = melted ice on wall = water in evaporator tray.
Re: Yet another gripe at connect.
exactly most people will surely cross reference spares, it just goes to show though that they cant really give a t*ss about your custom if they are blatantly trying to disguise prices
Re: SGS45E02GB/05 Instaneous heater failed yet again
if the machine is over foaming can cause premature failure ie; 5 in one tabs + salt + rinse aid or if she pre washes in sink and dont wash all of fairy off of pans can have the same result.
Re: Yet another gripe at connect.
wash vac done the hide the part number so no one can compare prices thing, and because of that the company i was with at the time used connect, funny how things turn out aint it :rolls:
Re: Bosch Gas Hob – VIDEO of sparking problem
and also you should NEVER work on an appliance live, was not a good idea posting a video with you working on it live with marigolds on, any people viewing this not really understanding the dangers of electricity will get the wrong idea and think its ok to work on a live appliance with marigolds on wich it certainly isnt.
