Forum Replies Created
-
Posts
-
Re: Hotpoint WF840P washing machine fault
the only 1 who can say that is you, you will need to check heater with a multimeter, and check wires to heater and thermistor check brushes to see if they are worn then the only thing left would be pcb, make sure you unplug it 1st though
Re: AEG Lavatherm T37400 – On/Off switch question
why not buy a timer switch and plug it into this http://www.argos.co.uk/static/Product/p … searchtext>TIMER.htm
but personalyi wouldnt run it while im in bed.Re: AEG EFC90001x or 60001x
yes unplug it and have a look to see where its gone pop from 😆 , but seriously without looking at it we can only guess and if its gone pop it should be pretty obvious they are pretty simple appliances, switch bank,module,motor.
Re: siemans se4200gb/07
unless you say what you have actually checked and unless martin goes out himself and looks then a guess is all you are likely to get i think
Re: Multi airflow fan noise on a Bosch KGN34X61
fan is hitting ice that has built up behind the cover, if its still under the 2 year warranty then call in bosch, as a temporary fix turn off for 48 hours with door open and put a towel in the bottom of the freezer to soak up melted ice.
Re: Indesit W123 – works on one programme only….
the machine takes in both hot and cold water but not at the same time, on the 1 that works i would hazard a guess that its taking in cold and heating to temp, on the others it needs the hot to fill then cold but because its not getting any it will just wait until it does, hope this helps
Re: belt off
how longs a piece of string 😆 , depends on make and model , bearings, pulley, wires catching belt, clothes in drum, uneven load to name but a few
Re: dirty dishes
if its a whirlpool dishwasher then check to make sure the upper spray arm feed pipe is clipped into the into the housing in sunp pan if not then the clips have broken and will need a new feed pipe retainer
