Forum Replies Created
-
Posts
-
Re: Beko d/w DE3431FW
have had the flood protection microswitch burning out causing similar problems hope this helps
smartin
Re: Bosch D/w
ki 12 relates to the gb number ie; gb12, from memory the wire cutting is to do with the salt low neon but the sycasim is turned on or off according to what ever gb number it is hope this helps
smartin
Re: aggressive customers
i had a screamer about a far eastern d/w 2 weeks old, cups were coming out tasting salty, she wouldnt let me look at machine she wanted another 1 coz water comes out of salt container when she unscrews lid but her last 1 didnt do this 😆 , she then went on to say her and the kids have been ill prob because of salt poisoning and wants to make a claim so i told her to go to doctors get a blood test done and then give us a ring.
i dont put up with any abuse, if customers are then i will butt in and explain that this may be their house but its also my workplace and i dont put up with abuse at work and if it continues then i will walk out the door, 9 times out of 10 they change their tune and are apologetic and explain its something else thats cheesed them off, in my experience people who are like that have other problems in their life aswell.
Re: Bosch F/F En-r KGV-3104-GB/04
there is a modification for these thats bypasses embedded cut out, havnt got info to hand but im sure someone will pm you in a while with a pdf, it has been answered in this forum before hope this helps
smartin
Re: Bosch WVD24520
yes it is the child lock went to one the other day as kladave said press the start button until the flashing key dissapears then you can set programme
smartinRe: BOSCH SRS45E08GB/18 not draining
if it has a grey plastic inner liner then access is through the bottom, 2 torx screws and the tin plate base levers off pump should be easily accessible, unplug 1st though empty all water out lay on its back and be carefull of sharp edges
Re: Bosch WBB24759 skipping spin
haier being the exception to the rule on that 1 chris, small drum any load no difference 😆
Re: Zanussi WDJ1257W Dryer fault
more than likely blockage behind filter in housing or condensor tank on side, valve o/c could be any of these easily checked though
Re: Bosch WBB24759 skipping spin
have you tested the machine ? if not 1st port of call would be to ask customer what sort of washing they are putting in as if could be something as simple as the oob detection is detecting uneven load and its timing out
smartin
Re: indesit door light flashing
was the door locks the same or was old lock black and new one was white i take it (idc) if the old one was not idc then the plug needs to be reversed
smartin
Re: Neff U1721 Circotherm – slowly heats up to a max of 100
are you 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure that the fan inside the main oven is working because that would cause exactly this problem and out of curiosity what was the original problem ?
