Forum Replies Created
-
Posts
-
Re: Zanussi D/W
I have used Devcon steel putty with good results
Re: Hoover SE220 wont spin
Thanks for the replies. I cleaned and tightened module connections and replaced a sticking pump and it works OK. Happy customer
Re: Low Pressure
I would always use a Stuart and Turner RG250 brass pump. Built to last and never any problems. Usually on american washers I would take a feed off the water valve. For machines which can’t handle the extra current you can use the same pump with an integral flow switch.
Not always the cheapest way to do it, but no call backs and a happy customer
Graham
Re: Merloni Smart Card Readers
I too have had CDSL phone me and email me wanting me to buy smart card reader, hardware key, and low end adaptors for £206.92. The hardware key I am considering buying, but their info says it is a MK1 key. Does that mean there is a MK2 ?
Graham
Re: Indesit WIXXL146 all lights flashing
Thanks for the reply. Interestingly the customer has phoned me back to say she tried the machine again and it is now working ok ????????
Re: Washing machine rentals.
A few years ago when I did rentals, I would insist that the customers own house insureance should cover any accidents or disasters.
I made it a condition on the rental agreement that the customer signed.
Graham
Re: wiring solid hotplates to energy reg
Most solid rings consist of 3 elements. A 6 position regulator will switch in differing combinations to give 6 power levels.
e g position 1 = element 1
position 2 = element 1+2
position 3 = element 1+3
position 6 = element 1+2+3
etcRe: Smeg DWI64 dishwasher dispenser unit melted!
There is a good chance that the triac on the board is faulty. Trace the wires from the valve, and solder on a new one. It might be worth a go
Re: CANDY PF24
Not sure on your model number, but when the interior light, the fast freeze neon, and the mains neon, don’t work, it usually means the control module is at fault. I have changed a few control modules, and it has always cured the fault.
HTH
GrahamRe: Fridge and freezer stats
Thanks for the replies guys. I did fit an VT9 to a large Hotpoint RL850 larder fridge, where the capillary went down a tube, but it kept overfreezing. So I ended up fitting a genuine Hotpoint one, and it cured the fault. But gen stats are quite pricey. Maybe a VX0 would have fitted. Thanks again.
Re: First hand experience of exploding oven door !!!
I had the same thing happen on an IGNIS built in single oven, except that it was the outer glass. The customer assured me there was no misuse, so I have know idea what caused it.
Re: Zanussi FL881 belt.
Connect list an pattern belt for this model as size 4L520, but sadly NLA (5031680192797)
