[timdowning]

Re: Hpt. WF541P Inlet Valve

I had the same trouble on this version and found that an old indesit valve I had fitted perfectly, all I had to do was individually spade the wires.

I think this connect part number is the right fitting:

5031689604116

[timdowning]

Re: Servis M9310W

I doubt module has fault.

On that model it could just as well be the door handle.

The metal pin which pushes through the hook and spring can just come out of allignment.

If you open the door from inside you can then take the outer trim partially off and re-allign handle parts.

Check the clear plastic part of the door handle hasn’t got a fracture in it.

[timdowning]

Re: burning smell from dishwasher

Cor what alot of effort for no return. :rolls:

[timdowning]

Re: ISE5-2

Wondering if it could be related to the door interlock problems??

Might be worth changing the lock before the fascia module.

[timdowning]

Re: Hotpoint Aquarius 1000

Strange one that!!!!!

If you do get a call back…check the wires to the pump that run down the front of machine from timer.

[timdowning]

Re: Siemens WXL1440GB/01 Element change

I had a squealing one of these today.

I’m sure you can do it by taking the rear panel off.

I only had to take the underneath inspection panel off to get to the pulleys.

Cant be of anymore use than that!

[timdowning]

Re: Fault code for Candy?

Check the heater whilst your there.

💡

[timdowning]

Re: ISE5-2 spin speed.

Jim, while i’ve got your attention….if you bump into an ISE5 dishwasher
can you try running the test cycle.

I couldn’t get it to play ball.

Cheers.

[timdowning]

Re: ISE5-2 spin speed.

It was mentioned here:

http://www.ukwhitegoods.co.uk/modules.p … light=ise5

But was sort of dismissed.

I haven’t had anyone question it luckily.

[timdowning]

Re: ISE5-2 spin speed.

I think it gets to about 5 minutes to go then thats it.

I would say 1200.

??????

[timdowning]

Re: Indesit D41

More likely circulation motor failure. The click may be a hum?

You know how it is with customers mimicking sounds!!

They will be holding the phone next to the the dishwasher if you ring back!

😆

[timdowning]

Re: Beko DWD5410W

Cheers Kev, thanks for all your efforts. Its good to know theres some technical info out there for these machines.

Nothing like having a test programme to run. Makes my diagnostic charge more acceptable to the customer. Hopefully. ❓

[timdowning]

Re: Hoover HNWL7146

Cheers Chris.

[timdowning]

Re: ISE5 version 1 backhalf

Swap it out and keep customer happy.

Thats what I did. 😉

I swapped it with a Hoover PE235, I hope I won’t get told off for that. I know what you guys think of Hoover. 😉

😆

[timdowning]

Re: Hotpoint WD420 dryer problem

Difficult one….we all get customers like that unfortunately.
Sitting with your meter plugged in for 30 minutes has got to be the way forward.

All the thought you’ve put into this one adds up to more time than that anyway. And you won’t get rid of her any other way.

[Author]

Posts