Forum Replies Created
-
AuthorPosts
-
timdowning
ParticipantRe: bosch wfb2405(facia?)
This should help.
timdowning
Participanttimdowning
ParticipantRe: Whitegoods September ’08 Meeting
Would of liked to have made it, but shall have to make my excuses.
Hopefully those who can’t make it can be kept in the loop?
Cheers.
timdowning
ParticipantRe: WD420p module
Many thanks.
timdowning
ParticipantRe: Hpt T/D Dryer neon?
Martin, don’t forget to un-bridge the stats!!!
😉
🙂
timdowning
ParticipantRe: Hotpoint WD condensor NLA?
I think they may be correct!
Connect and homespare saying the same!
🙁
timdowning
ParticipantRe: Servis M9503s W/Dryer.
By the way I’ve got one of those modules in stock. You can have it
for the same price I paid for it. £79.48 + VAT + Postage.(Part number 546112100).
timdowning
ParticipantRe: Servis M9503s W/Dryer.
I would say just module.
timdowning
ParticipantRe: Servis washing machine Mod M6713W
What was the part number of the board fitted? was it 546089200?
If its is the above module then I would say either its a wiring problem or the module fitted has been programmed with the wrong information.
On the left side of the module you should have 2 blocks of connectors. The way I remember the wiring of these is there should be 4 of the gold contacts unused at the top.
On the top of the board you have 2 more connectors. One with two wires and one with 8 I think?? I’m sure its the longer connector on the left then the smaller connector on the right??
If its a programming fault then you will either need an unprogrammed module or the Janus hand held unit to re-do the tag insertion.
The wiring is from my memory!!!!!!!!!
timdowning
ParticipantRe: Servis washing machine Mod M6713W
What was the part number of the board you fitted??
I wouldn’t have thought it was a wiring error on your behalf because you said you fitted the board recently. so I assume it worked ok for a while after you fitted it??
timdowning
ParticipantRe: ISE5 mk2 technical info
Cheers Chris. I take that as a yes then. 😉
How many selling points do you need????
timdowning
ParticipantRe: bosch SGS45E02GB/45 PROB
Impellor jug. The white plastic part inbetween inlet solenoid and side tank.
timdowning
ParticipantRe: MOT failure:(
Or just stop ‘Pimping’ your van.
What size sub have you got in it???
🙂
timdowning
ParticipantRe: Servis M6500s
If you change the main module on the Janus type the front pcb will program the main module once you switch on the machine. (as long as the Janus module hasn’t been programmed before, as in returned stock back to servis etc).
This model could be both types, Janus or pre-Janus.
I still would put money on it being the selector though.
timdowning
ParticipantRe: Servis M6500s
I would say selector at fault. Sometimes if your lucky you can carefully take selector apart and clean contacts.
-
AuthorPosts
