Forum Replies Created
-
AuthorPosts
-
timdowning
ParticipantRe: Hotpoint EW92
Cheers!
timdowning
ParticipantRe: EKC6044K
Sorry Don can you send Service instructions & technical data.
thanks.timdowning
ParticipantRe: EKC6044K
01
Service manual please.
Thanks
timdowning
ParticipantRe: Whats the most annoying thing tenants do?
It never fails to amaze me how desperate people get.
The letting agents are getting worse too, as long as the tenant is off their back they don’t care how it may affect the next person down the line.
People need to get some real problems.
But if they do don’t tell me about them when I’m at their house.timdowning
ParticipantRe: Water pithering out of my ISE10 drainpump! :-O
Just a politer way of saying p1$$1ng out.
timdowning
ParticipantRe: Bosch WAS32462GB
I assume the OFF position is at 12 o’clock ?
timdowning
ParticipantRe: Display totally dead?
Yep sorry Jim, this is what I was thinking of:
Backlighting
Two minutes after the wash programme finishes the display backlighting enters energy saving mode.timdowning
ParticipantRe: Display totally dead?
I could be totally wrong (generally I am) but was there not an energy saving option / setting on this model?
timdowning
ParticipantRe: Bosch dishwasher E24
Also try opening the door 3 or 4 times every 15 seconds upon starting & see if it eventually behaves itself.
timdowning
ParticipantRe: How do you manage against the ‘WWW effect.’
Radio 1, you are not that trendy.
timdowning
ParticipantRe: Hotpoint Dishwasher
These newer dishwashers have a variable speed circulation motor which is controlled by the board.
I would be hesitant in just changing the motor.
I had one doing the same the other week. I gave it the normal clean out & as always I suggested the customer to change to fairy gel capsules rather hard tablets.
All seems well with it now.timdowning
ParticipantRe: Bosch D/W drain pump failures
No trouble as such other than I always carry one in the van.
As long as your not having trouble with early failures on the ones your replacing then alls good in the world…timdowning
ParticipantRe: Hoover DYN9164DPG – persistent E03 code
E05 is because you’ve disconnected the temp sensor plug.
Stop playing around with it & just replace the heater it will then be ok!!timdowning
ParticipantRe: Red tape gone mad!
The end result is they buy a new product.
More oil used.timdowning
ParticipantRe: Red tape gone mad!
Things would get done but at an increased price for everyone in the equation. Who pays for that, Joe public.
Mad world. -
AuthorPosts
