timdowning

Forum Replies Created

Viewing 15 posts - 421 through 435 (of 2,180 total)
  • Author
    Posts
  • in reply to: Hotpoint LFT114 #427478
    timdowning
    Participant

    Re: Hotpoint LFT114

    Its not something silly like you’ve plugged the heater plug into the motor…

    in reply to: ISE T25wc dryer fan #427176
    timdowning
    Participant

    Re: ISE T25wc dryer fan

    Only done a fan change once. Not a 5 minute job, I’m sure I had to cut the old fan off due to it being so tight. I also had issues with getting it to be water tight once back together. If you can’t get the housing gaskets I would be patient and let some silicone set before testing with a wet load.

    in reply to: Seimens SN25 M830 UK Dishwasher Error E23 Urgent help #426704
    timdowning
    Participant

    Re: Seimens SN25 M830 UK Dishwasher Error E23 Urgent h

    You could buy one and replace it? Its behind the front panel. Unplug machine first of course!

    in reply to: Hoover wmh147df unable to change cycle #427151
    timdowning
    Participant

    Re: Hoover wmh147df unable to change cycle

    Or the programme selector needs a squirt of switch cleaner. (with machine unplugged of course!)

    in reply to: Hoover dishwasher DDY062-80 32000621 1152 7850 #427078
    timdowning
    Participant

    Re: Hoover dishwasher DDY062-80 32000621 1152 7850

    You can get a no heat due to that switch. Its a pressure switch which activates on the correct circulation pressure.

    in reply to: Indesit IWDC6105UK washer dryer #427079
    timdowning
    Participant

    Re: Indesit IWDC6105UK washer dryer

    Did you check the dryer probe(ntc) / wiring?

    in reply to: Hoover VT616D2/1-80 #427054
    timdowning
    Participant

    Re: Hoover VT616D2/1-80

    Sounds like a heater fault.

    in reply to: snubbed by DAD & Portway #426868
    timdowning
    Participant

    Re: snubbed by DAD & Portway

    Swift works well for me, delivery twice a week & they leave the machines in my garage as I’m generally out.

    To be fair it is becoming more and more difficult to compete. Ao.com aren’t helping!

    I generally keep a few washing machines in stock as well as an integrated dishwasher.

    in reply to: work update #425015
    timdowning
    Participant

    Re: work update

    Is it possible for all companies that use or potentially use WTA members to be listed here, or at least can someone email me them please.

    Thanks,

    Tim.
    t.downing@hotmail.co.uk

    in reply to: Siemens WXL127AGB #426748
    timdowning
    Participant

    Re: Siemens WXL127AGB

    Normal for this model I would have thought. What does the rinse and spin do, sometimes this is the only way to get the full spin time.

    in reply to: BEKO DWD4312W rinse aid not dispensing #426737
    timdowning
    Participant

    Re: BEKO DWD4312W rinse aid not dispensing

    If the wash quality is ok then forget about fixing it. Life’s too short…

    in reply to: SAMSUNG DV70F5E0HGW Heat Pump Tumble Dryer HE error code #425962
    timdowning
    Participant

    Re: SAMSUNG DV70F5E0HGW Heat Pump Tumble Dryer HE error code

    You’ll have to give Samsung a call.

    in reply to: BEKO DWD4312W rinse aid not dispensing #426735
    timdowning
    Participant

    Re: BEKO DWD4312W rinse aid not dispensing

    Don’t worry about it, just use an all in 1 tablet.

    in reply to: bosch wae24466/gb03 error 21? #422584
    timdowning
    Participant

    Re: bosch wae24466/gb03 error 21?

    That’s why then…

    If reset is carried out more than 5 times before brushes are replaced then reset must be carried out 3 times after brush change with a different set of finger prints, its in the manual.
    🙂

    in reply to: Candy Goc58F-80N – Where Is The Capacitor?.. #426576
    timdowning
    Participant

    Re: Candy Goc58F-80N – Where Is The Capacitor?..

    Google:

    7uf capacitor

Viewing 15 posts - 421 through 435 (of 2,180 total)