Forum Replies Created
-
Posts
-
Re: Siemens D/W SN25M830UK/01
Can someone kindly send me the tech info on this machine.
Diverter timer getting hot but not diverting, stuck in top spray arm mode.
Would be nice to see how these things come apart without me jabbing and prising too much.
Ta.Re: Advertorials
If i’ve read the terms and conditions correctly the no fix no fee is if you take out the years warranty rather than the one off repair. Lets hope people are put off by the price or read the small print, is that wishful thinking?
Lets hope they spot this type of forum;
http://www.uk-insurance-index.co.uk/insurance-company-1689.html
Re: Mid-life crisis?
120
Thats the new retirement age isn’t? Only 83 years for me to go then…
Thats another 60 years worth of cruises Jim. Hope you stay busy, as that must be a good £300,000.
Re: Mysterious laundry marks on clothes
Intertek, Milton Keynes. 01908 857777
They may be able to assist?
Re: hotpoint boots
I may be wrong, but on the higher spin models aren’t there drain holes all the way round the door seal rather than just at the bottom??
I had a FEW12 that had a welded tub with a WMA front panel. Tried a WF seal and WMA but neither fitted. Customer in the end was happy with me cleaning and refiting. FEW I thought. That was a crap pun wasn’t it.
Re: hotpoint wma type wont start
To eliminate door hook / handle or spring issues push the door lock across with a volt stick or something similar.
If it starts then issues with door parts. If not and the door lock and wiring is ok then module fault.
Re: Comerical washing machine.
I was just being nosey, which isn’t like me, and looked up Alpha services. No call-out. And only £20 Labour!!!
Is the Isle of Wight stuck in the 80’s?
What are property prices like?
Re: Technics integrated washer????
If it is a Bosch then the normal door seal snagged or split.
Hole in sump hose etc.Pretty good lower panel to have a nose through.
(Ive had a number of them where water leaks down the front from the door seal & manages to trickle through the access panel, then activating the float.)
Re: Bearing Replacement – Bosch Exxcel 1400 WF02864GB/01
Its extremely rare for the bearings to fail on this range.
(Massive job, not to be taken lightly.)I would be checking for obstructions in the pump first.
I do have customers thinking the bearings are failing when their carbon brushes are getting low.
Power off if you are investigating.
Re: Baumatic / Servis?
Unfortunately not. Its more like a M6003 knob. Its a push fit type onto a selector rather than onto a timer shaft.
Thanks.Re: Lamona Washing Machine got mind of it’s own!
The selector may only be part of the problem. If the machine is filling…draining…filling…draining…filling for half an hour, the drain hose of the machine could be too low and the water is syphoning out of the machine.
To be fair I dont find these machines that bad.
