[Turbo]

Re: Alias Haier

I also avoid Haier, I find it sole destroying repairing this crap, would rather starve to be honest 😥

Graham

[Turbo]

Re: Whirlpool Dishwasher ADG450/05 Water Heater

I fitted 266195, the only difference was this one had the sensor for the auto wash which I did not need.

Thanks a million

Graham

[Turbo]

Re: Whirlpool Dishwasher ADG450/05 Water Heater

Typical I have 266195 in stock 😥 I wonder if the difference is the thermostat?

Graham

[Turbo]

Re: Whirlpool Dishwasher ADG450/05 Water Heater

I must admit I am getting tired of Connect not just on price but the amount of Bosch modules I receive where the box has been opened and the part fitted. Apparently things are going to change and they are going to get very strict on what they take back from now on.
Personally if I misdiagnose a job I would not try to send the module back once fitted. You have to take it on the chin put it in stock and hope one day you will use it.

Graham

[Turbo]

Re: Whirlpool Dishwasher ADG450/05 Water Heater

Thanks very much for your help guys 😉
Connect are showing a price of £43.98 + vat to me, their pricing is all over the place yet again.

Cheers
Graham

[Turbo]

Re: Haier / Hec washers

The Chinese hate interference, you have been warned 😆

Graham

[Turbo]

Re: Double inlet hose

C00194506 is £4.29 from connect. I always have one on the van. They are ideal if you are working in a flat with very low water pressure and you are there to change the leaking hot inlet valve. I tell the customer is would be better to go cold water fill only with the use of this hose. Better than those awful “Y” piece connectors. Makes for a really tidy job IMO

Graham

[Turbo]

Re: Hotpoint TDL 34P Static Shock

Earth strip ok but is there a special lubricate (grease) for the strip?

Thanks
Graham

[Turbo]

Re: Tips, Tricks & Shortcuts

Was stuggling to find a leak on a Bosch dishwasher last week so in desperation I added some food dye while on a test cycle, it worked for me 😉 Did a test to see if it would stain the basket or arms etc

Wear gloves and don`t drop the bottle!

Graham

[Turbo]

Re: Crooked Customers

Ha Ha brilliant!!!!!!!!!!!

[Turbo]

Re: Bosch WAE24162UK/01

Got to be the board IMO
Will need programming but instructions are provided.

Graham

[Turbo]

Re: ZWD 16270W Cleaning Condenser

Thanks Chris looking forward to it 😥

Graham

[Turbo]

Re: Zan W/D ZWD 16270W Thermistor Plug?

Brilliant as ever.

Thanks

Graham

[Turbo]

Re: Zan W/D ZWD 16270W Thermistor Plug?

Not sure what you mean by both thermistors?

Graham

[Turbo]

Re: Zan W/D ZWD 16270W Thermistor Plug?

You can`t fix spade connectors any more as they have changed to those little micro connector you now see on some inlet valve coils etc
The old the thermistor Prt no was 3792171013 the new Prt no with the micro connector is 3792171104. I am sure they are the same except the connector as I notice they are still using the same large thermistor that sits on top of the dryer assy nearest the chimney Prt no 3792111415.
This dryer looks a real short term job as the drum is sealed and no longer has a split cabinet with no easy access to cleaning out the condenser assy 😥

Thanks

Graham

[Author]

Posts