Forum Replies Created
-
Posts
-
Re: Servis XL6 – Water gushing out of powder tray!
Hi
To find the age of machine look at the serial number the first part will be year of manufacture 200* or 98 or 99 if before 2000.
Re: Nuova Ibmei: Electric question
Hi
Read this http://www.ukwhitegoods.co.uk/modules.p … pic&t=4359 .
Re: New Connect website
Hi
Martin I’m still on the same Connections site as you , I had problems logging on so phoned Electrue . They said they had changed the login page and they sent details how to reset login,but I am still on the original connections site. So there must be two sites running
.
MikeRe: One piece welded tub seized solid!
Hi
Some of the new Servis machines have welded tubs with non removable pressure chambers .
Re: Ikea / Whirlpool FCSM6 thermal fuse???
Hi
On some whirlpool ovens F03 is a main PCB fault , so PCB would need to be changed .
Mike
Re: Hotpoint dryer plus 9315 – strange noise
Hi
Sherman2011 look at the date of this thread , it is from September 2005. So you are abit late with your reply.
Mike
Re: Changing Door Swing on Zanussi ZDE57140W Dryer?
Hi
You do not remove front panel , if you have the same model as above just follow instructions. If you have a different model it may be that the door is not revesible .
Make / model and serial number please for further advice.
Re: Zanussi ZWF1431W bearing replacement?
Hi
The welded tub and the split tub use different suspension components.
Mike
Re: Zanussi ZWF1431W bearing replacement?
Hi
The motor pulley is not designed to be removed, it is a press fit. So to remove it you most likely damage the motor shaft, and it would need to be refitted to the correct position and be very tight.
The drum may look like its just a modified split drum , but if you split the drum and providing you can get a seal for the drum and refix with bolts ,then you get a problem and drum leaks or floods your insurance company will not be too happy.
Mike
