Forum Replies Created
-
Posts
-
Re: ariston awd12 tumble dryer
This happens when it’s set to go to tumble when the spin cycle finishes- the dryer control is on.
PaulRe: Whirlpool ADG722H Heater clips
Whirlpool do thin jubilee clamps that do the job very well, expensive though, there are different sizes from inlet hose size to sump hose (dishwasher) size.
Perhaps one of the whirlpool lads will provide the part numbers for you.Kevin
Re: Beko Cooker cold oven
The cookers only 4 months old. The kitchen can be quite cold because the back doors open a lot for the dog. An engineer has been out and said he can’t find a problem, I’ve called Beko and asked for a replacement cooker and if another one done the same I wanted a different model. Beko have decided to send another engineer, he’s coming on Thursday.
Re: LG WM-1465FHD
hmmmm i guessed as much…
is it easy to fix??
how much is a new PCB?
It wouldnt be a stuck valve would it??
Thanks
Hi … just a quick note and BIG BIG THANK YOU for your help and advise. The cleaning of the filters defiantly solved my problems. Machine is working perfectly now and wife is well impressed … clothes spin to almost dry now, before they were very water logged…
Thanks again … hopefully I never need to use this site again … but if I do, it’s carefully bookmarked safley away…
Cheers… TJ
Re: re: margherita 2000 ariston washing machine
I have contacted ariston and a service engineer will be calling tomorrow. I’ll let you know how I get on.
Thanks for you help. 😉Re: Dishwasher cutting out
That’s a good point, and one I’ll remember for the future.
I think I’ve pushed this new machine as back as far as it will go so it could happen.
Thanks
Jason
Re: Bosch f/f KSU40640GB/01
Dave, I can’t thank you enough for this, though my wife says: Has Dave got any suggestions about where we put the freezer contents for 24hrs!
Women! I ask you!I’ll let you know how we get on.
Thanks again. PaulRe: Bosch SMS6032GB/14 Int Dead
Thanks for the advice Martin.
I did check the Microswitch. My gut feeling was time to call it a day as well. I will look into another Bosch? Then They are the best new machines?Thankyou for your help and what an excellent site.
Woody
(Ex TV/Video Engineer) Who was glad to get out! 😯Re: Blomberg CFFN 311 not working properly
Re this model of Blomberg.
We have inherited one of these models and would like to know where replacement shelves can be bought from as some are missing.
Any ideas?
2 freezer draws (large)
2 Door shelves (for bottles)
Cheers Chris Douglas
Re: Hotpoint WMA (Bearings)
Hi,
we have changed loads of these drum kits and have not had to return to any of them. So it would seem from our experience to rid the premayure bearing failure problem.
Kevin
Re: brandt frost free problem
Many thanks for your replies. I will do as you say and defrost the freezer, and hopefully this will solve the problem. I will let you know. Oh I cant find the serial number anywhere!. There are no markings anywhere on the unit. And the manual seems to be general standard.
Re: hoover new wave plus 5
Yes Dave hose is high enough about 2 1/2 foot high
I have been using it in this position for 2years.
Totally baffled
I have cleaned the pump assembly and sump including the ball and piping but no matter what cycle you put the washer on it starts taking water in and simultaneously pumps it back out. The water level does not get high enough to trigger the wash cycle. tried disconnecting the pump and the wash cycle begins when the water reaches the right level but the water does not turn itself off and overfills. But when the machine has just been turned on and no cycle selected it does nothing,When put on a spin cycle water still seems to be taken in but otherwise it spins o.k but clothes are no drier than before the spin cycle.
