Forum Replies Created
-
Posts
-
Re: Bosch WFT8440GB/01 washer drier fill fault.
Cannot find that model, but Bosch, unusualy, used to list a part number for the triacs on the w/d boards. Odds on its only one of those failed. Can trace the wiring back from the valve to find which triac it is.
Re: FAME!
maltheviking wrote:
Ok il’l keep it going,I used to play in a few bands and have been on stage with……….Alvin Stardust….Chas n Dave……
You playing on Ozzie’s dream then? 😉
Re: Hygena/Smeg APL8214/4 dishwasher
Firstly its a Brandt, not a smeg.
Are you sure you removed and checked all the hoses from the air break/filler to the sump? there are about 3 or 4 IIRC. Its got to be an overfill problem.
Re: Caple hood
Customer just told me their order stated model STU90SS2 not that there is anything on the hood to support this. Done a PNE on connect but dont hold out much hope.
Re: smeg dwd 1sse
Careful here guys, the red solonoid was rubbish and caused lost of modules to fail, and not fitted for years, the other thing to look out for is a duff pcb energising the dispenser coil continuously. If the flap opens at switch on then you have an expensive problem and the dispenser will fail again.
Re: Caple hood
Best described as a square shaped board abour 4cm x4cm, 2 slide switches one being single position (lights) the other four position.
Re: FAME!
maltheviking wrote:This looks like a good thread for a bit of name dropping and claims to fame. Any takers? :rolls:
Seems like I am the only media Whore around here. 😉
Re: Is a Hotpoint the quietest washing machine available?
But how do they rate for how long will it be the quietest machine?
Re: FAME!
Sorry Andy, missed that one! You will have to sneak into Wh smiths and take a peak at Evo magazine this month (Feb edition out Jan 10th) as, not wishing to bragg about it (OK I am really) I am on the front cover! Well car is, I may be inside somewhere though)
Re: AEG favorit 80820 leaking in to tray
If all else fails, change the regeneration doser in the side panel, usually gives you a year-18 months before it happens again.
Re: Bosch WFG2020/GB01
You are welcome John,
Best way to tell if machines are heating is to use a clamp meter on either the L or N wire. I have often used this method to prove to customers that their machine is heating after they have sworn it isnt as the glass didnt feel hot.
